Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have CCM 4.1 and connected a SIP trunk from an Asterisk server. Inbound and outbound calls work great... until some one wants to transfer or conference. If a CCM client tries to transfer the call that came in over the SIP trunk, the CCM Client l...
hi alli am having issues with call quality. no other phones are having issues. i have checked cmr and record shows no jitter. i have checked the stream1 on the phone and max jitter is 18. do you guys think its related to firmware. can anyone suggest ...
Hi,I've couple of cme verison 4.2 and c2821 routers.I'll upgrade cme 8.6.I used to cme 4.2 service aaa configration.!application service queue flash:app-b-acd-2.1.2.2.tcl param aa-hunt3 7710 param queue-len 10 param aa-hunt5 7700 param aa-hunt1 7...
HelloI have a Cisco 3845 router running IOS c3845-advipservicesk9-mz.124-3i.bin and MGPC and two PRIs for PSTN calls. Now i want to test SIP trunking on this router and TAC told me to upgrade the router to c3845-advipservicesk9-mz.124-24.T6.bin in o...
I am preparing for an upgrade and P2V conversion of all UC applications(CUCM-8.03, UC-7.1.5.3., UCCX-8.0.2.1 , MP-6.0.6, CER8.0.1.). We are currently running on MCS7800 series servers that would be unsupported as per the matrix if upgraded to 8....
Hi, I have a Cisco Call Manager 5.0(4) and UNity 4.2(1). I need to configure AutoAttendant for users calling to my pilot number. How I can configure that ? Is there anyway without using IP IVR ?Thanks,Pete
Hello,I'm kind of new in this domain so I'd like to have an advise from someone more advanced. What cisco solution is the best for terminating voice calls with a high precent of G729r8, g729br8, g729r8-prietf codecs to an ISDN trunk?Thank you.
Is it possible to get and set a wallpaper from CUCM on the Cisco Cius?I can't find anything on this in the administrator guide on this also not on what the optimal resolution is, I guess 1024 x 600..
I am needing to know if there is a way to track how many calls are going out at the same time on one of our voice GWs. I currently have a 2811XM running IOS ver. 12.4(22)T4.Over the last two weeks I have had to reboot the router due to the fact cal...
Hello All,I use a cisco CUCM 4.2. I want to know which fetaure allow to do one thing: When i am speaking with user A for example on my Ip Phone and user B call me, that it receives a message telling him that I am already in communication, and ask him...
hi,I have 5 ccm in a cluster.Out of 5 1 show replciation count 3 all other shows 2 .The one which show replication count of 3 is in wan with latency < 4below is some portion of reporting<title>Unified CM Database Access</title><comment>For every serv...
I have E1 ISDN plan with 10 segregated channels and 100 DID's which are connected to my Cisco Phone System UC560. I noticed today that one of the ext. and its associated DID is not working and giving busy tune when dialed from outside. Even when I tr...
I have the following setup:Call Manager 5.1H323 Gateway with SIP Trunk to Call ManagerI am setting up following scenario:Connected new analog Telephone Line on H323 FXO portsetup connection plar for CUCM Extension on that FXO portI am not able to cal...
Dear Colleagues, i have 2821 router with unity express used for voice mail,useres needed to access there voice mail from PSTN, so DID number assigned to the voice mail pilot number.now any one call from PSTN this number, receive the known cisco w...
Hi,I was configuring MGCP. Was adding new e1 PRIs. Added 4 PRIs successfully. But when adding 5th and 6th PRIs I am getting one error message. Is this highlighted error due to insufficient dsp rsource?iec-v-gw-01(config-controller)#controller e1 0/2/...
