Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am running Call Manager 7.1.5 with a CUBE. I am trying to find out what information is sent out by the Call Manager when making a call across a SIP trunkFor example, am I just sending the External phone number mask or is it actually sending other...
Hi,Can anyone who has completed an upgrade to 8.6 call manager confirm that you need to fully install and switch versions/reload the publisher on 8.6 before you attempt to load the s/w on the subscriber and swiitch versions ?before 8.6 you can upload...
I have several route patterns in CUCM7. I have the usual 11,10, and 7 digit route patterns. As soon as I dial the last digit of either of those patterns, the call goes to my CUBE and out to my SIP trunking provider right away. However, I am also test...
How to change the language on a IP Phone? It's possible directly on Phone?Regards
Hi,Plesae tell me How POE switch will identify connected ip phone doesn,t have external power supply after connecting ip phone to the switch.and wht is the booting preoccess of the ip phone.
HI,We have CUCM7 and i m trying to configure time of day routing to CTI route point XXXXXXX665. In businesshrs 8-16 i want call to be forwarded to number XXXXXXX740 and after hours 16-08 to XXXXXXX741. The problem is that when i call CTI route point ...
Hi,Can anyone tell me that how to access that Alarm and Trace reports which are enabled from Cisco Unified Serviceability webpage? I have enabled Trace on and checked all the concerned traces and alarm but from where i can vioe those. Thanks
We have changed IP addressing of our VoIP phones from Public Range to Private 10.x.x.x. Our Main Site IP addresses change took place before I started so don't know if some configuration change was made on CUCM 6.1.3 to make it work. I changed the...
Hi All,When we call somebody or receive a call (all calls internal and external) than the first 1-2 seconds are quiet and we or the other person does not hear the salutation i.e. "Hello" Please let me know the cause of such issue. Thanks
Hi,Can anyone tell me whats the difference between Cisco Unified Serviceability and Cisco Unified RTMT. Which tool is most beneficial in order to troubleshoot the voice.
Hi TeamI'm attaching the logs and debug commands of the CME router 3925 with this request .There are ATA 187s and CME (having OS 9.0 beta version that supports ATA 187).The phones connected to the ATA 187 are having only the busy tone.Kindly please h...
hello,i have call manager cluster ( 1 publisher 2 subscriber)i will add a new subscriber to the cluster lets name it sub3.the sub3 server will be placed in a different vlan from the cluster(pub and 2 sub). ip access will be granted between the two vl...
How can I configure the cisco router/gateway thats connected with a PRI to a legacy PBX to discard any invalid Calling Party Number on calls coming from the PBX (a number not in the valid configured range on the legacy PBX?Toplogy: Legacy PBX--PRI--C...
Hi ExpertOne requirement from client that is "Internal and external calls shall each be indicated by different, distinctive ringing patterns", anyone knows how to achive this on CUCM? i'm not using CME. Thanks!!!Wish you, Happy Holiday!
HiAnyone can advise why time period set based on date range doesn't work?Eg. If I create a TP with year on Dec 28 (one day only), it works. but when i set TP based on year on Dec 28 until Dec 30, it won't work.What is the purpose of the "Year On XX ...
