Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
The microcircuit of ethernet controler of ip-phone CP-7940 is damaged. Number of microcircuit isBroadcom BCM5912A2KQMG TG0945 P12 945669 1Cisco doesn't sell service any more for repair of this phone. We have service center and we can replace this mic...
Hi ,I have this output about a Publisher server, CCM 5.1.2.2000-3 (active) , 5.1.2.1000-11 (inactive)Total Free UsedDisk/active 12317944K 508092K 11184124K (96%)Disk/inactive 12317912K 498840K 11193344K (96%)Disk/logging 4984...
Hi everyone!I'm putting together one 3945 router. I need to know what else do I need for SIP trunking using Cisco Comminication Express Manager? Below is config:ProductDescriptionCISCO3945-V/K9Cisco 3945 Voice Bundle, PVDM3-64, UC License PAKSL-39-DA...
Guys,Just have a quick query. In EMCC, for a visiting phone to be able to make calls to the PSTN using the visiting cluster's gateway;based on his home cluster dialling pattern or habit, do you have to configure the RP for the dialled pattern on the ...
Hi All,Only 1 of our user getting Unknown number on display for all the incoming external calls. Display is working fine for all Internal calls.Phone model - Cisco soft phoneVersion - 8.6.1.0CUCM version - UCOS_7.1.5.31900-3.Attached the screenshotWa...
Hi, I am running cucm 7.0.2, i have one subscriber. 1 cisco unity,1 meeting place & 1 unified presence. Do i have to take note of the subscriber and the rest of the equipments?regards,yeo
Hi , Problem Description : got a request to add a polycom phone on the cucm . Do we add it as a third party device, and can any one kindly share the exact procedure to do it, as a SIP device. cucm version : 6.1.3
Hello, I am enquiring on deploying CIPC using SMS. I have found plenty of docs on how to manipulate device names, TFTP servers, Etc... but I can not find a way to automatically select the box under the audio tab marked "optimize for low bandwidth" to...
HiI implement a cucm cluster in a company, they also have a panasonic IP PBX that connects to the PSTN PRI line.The problem is when the total active h323 connections to PBX reaches to 14-15 sessions, clients get fast busy signal,I checked the PBX h32...
I'm running Call Manager 6 and I thought about using sip trunking.I keep hearing a lot of good things about but I'm not sure.What am i gaining but using sip trunking? Does it increase my bandwidth at my remote sites?I'm using G7.29 and I'm not sure ...
I've got a 7911 that just isn't playing ball.It starts it's firmware update (It's stuck trying a firmware update) and downloads jar11 & cnu11 fine.However, when it comes to apps11, it pauses for a long time just saying "Upgrading", then it *very* bri...
Dear all NetPro gurus,One of my existing clients are currently using Microsoft Office Communicator 2007 R2. They are currently using CUCM 8.6 but they don't have any Cisco Presence server and all their users are using Windows 7. My client is intere...
We have a CUCM server with some 7962/7945 phones. We want to be able to dial from Windows and such, but we are stuck where its asking us for a phone username and password..Unfortunatly I am not much of a Cisco guy so commands are a foreign to me. I...
Scenario is thisSiteASiteBExternal/Internal call into SiteA to general number. User needs to transfer call to SiteB users Voicemail using the TrsnfVM softkey in CME.VPIM networking is configured between SiteA and SiteBusers are configured as remote u...
Hi, I have a user who is asking whether we can have 8 digit dialling interally for her specifically. We normally have the 4 digit extension system going up. Is such a thing possible at all ( translation pattern ? )
