Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
HiCan we use CUCMBE as A backup for Our CUCM ?because we have CUCM and now all the phones are register on it so can we use the unused CUCMBE to be as backup for the CUCMregardsTalaat
hi allwe have noticed high bandwith b/w cucmbe and cucmpub on random ports. what traces should i collect on cucmbe, since the traffic is origination from cucmbe to cucm.
Hello,I am using CME and i have define the specific dn that is 10, but now i want to increase this dn w/o disturbing the assigned dn and their number. can i edit this dn. please instruct me what would be the next cammand.Ahmer Ghafoor
Hello all:I have a Cisco 7942G phone running SIP firmware version 8-3-2. I cannot, for the life of me, get the phone to load the latest version of the firmware 9-2-1. I have my environment setup correctly as I was able to load up version 8-3-2 with n...
I´ve a doubt about QoS and how egress queues manages QoS markings. I know that cos-dscp mapping is used when inbound traffic has CoS QoS labels. So this traffic is then mapped to a DSCP value and.... what happens next? is it managed by a mls qos srr-...
I have my certification in 2 days for ccvp and i still i have not much information on SAF, can somebody help me with some good documents to understand it practically ( apart from the day to day use) which may come up earlier . Would really appreciate...
A cisco IP phone is set to use enbloc signaling. Will a user have to wait for the inter-digit timeout to expire before their call is routed if there's a route-pattern that matches the called number with the "urgent priority" check box marked? For ...
Hello everyone,I have a single cluster, multi site deployment of CUCM 7.1.5, with centralized call processing and a combinaiton of SRST / local site CUE & SRST/SRSV sites for the remote end. Each of the remote sites has it's own partition.I've recen...
Hello,If a single user has a hard and soft phone with appropriate user license for each endpoint will this require 1 x Feature_License user or x 2? I presume 1 but I could not find difinitive documentation.Thanks - Mike
Hey people!So I am in the process of getting my feet wet on Unity. While in the proccess of cleaning up inactive Unity users I found about 2,000 old active directory accounts that aren't attached to anything in Unity. I suspect that before my company...
Recent upgrade of a client to CUCM 8.6.2.20000-2They had a campus operator running Attendant Console simply to route calls easily to users in the directory. Nice setup, touch-screen monitor, worked perfect.Since Cisco yanked the stand-alone service o...
I recently inherited a CUCM 7.1 cluster that had a couple years of mis-management. I was wondering what the best way to clean it up would be? First off, I think there are a lot of device profiles for phones that no longer exist, what would be the ...
HiI am after advice on the best way to lock down a conference phone from being able to dial outbound calls without the user having to enter a PIN number first. The system is CUCM 8.5 and I am new to this system and after some advice on the best way ...
Hello,I have one of my sites where any of my IP phones auto register with the MGCP keep alive port on the call manager instead of the call manager auto registration range. For example the phones register with 2428 DN instead of the 4000's auto regist...
Dear All,I currently have a customer who wants to use CUBE for inbound DTMF conversion:-Q1) Currently, my customer topology is as follows:-LAN ---- CME (2901) ---- FW ---- 2821 ---- InternetIs it true that I can't put the CUBE on the 2901, and i ha...
