Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I was trying to update CUCM users ( LDAP integration ) and spent lots of time to figure out that some of the options in BAT.xlt file do not appear until you setup it correctly.The objective of this discussion is to let everyone be aware of this fact ...
Hello, what is the default "out of the box" windows unity username and password? I inherited a new cisco windows unity box to setup and have no documentation with it and need to log into windows but haven't got the username and password. What are the...
hi! does anyone know what shd be configured on the cisco switch port if i would to use a polycom(c x600) ip phone with 2 ethernet port for microsoft communicator? One port will be connected to the switch and another port to the pc. How;s the voice vl...
Problem is when we call from Branch A to other branchB , after dialing the extension number, phone rings and after lifting up the handset the call is droping with 4 or 5 beeps , and from Branch B the calls can be made easily and there is no issu...
Dear IPT Fellows,We recently got a SIP trunk which is connected to our H323 Gateway. H323 Gateway routes all calls to our Call Manager.Inbound and outbound calls are working fine. Inbound DTMF is also working fine but outbound DTMF to SIP trunk is no...
Can I edit an extension in CUCM business edition in unity connection? We are AD sync'ed, I know it is possible I just can't figure it out. I have done it before. I created a wildcard extension (e.g. 229X) and associated that to a CTI route point, I t...
Hi We are building Unity Connection Cluster with 8.5. The Publisher (1st Node) is up and running and has got the High Availaability license installed. Als the Hostname / IP Address of the Secondary node is already added on the Publisher Node of Unity...
Installing a second server (subscriber) to an existing Unity Connection 8.5(1) cluster.The hard drive came pre-loaded with Unity Connection 8.0(3a) so at setup I choose Update during Install, it asked for my ftp into, retrieved the upgrade patch (4GB...
G'dayJust wondering if anyone might have an idea why what would be wrong with my config i have been trying to get the CME to work with a IINet SIP trunk all i got from them is Number range: 08 XXXX X880 - 08 XXXX X899Domain/realm: comapnyname.iib...
HelloI faced strange problem today. I have CUCM 7.0 as a publisher. today I try to install subscriber with excact same version.When installation reaches integration step with publisher, I enter publisher hostname, IP address and security password b...
Hi,I am using Cisco ATA186 with SCCP v 1/1, firmware version 3.10 with CUCME v 7.0. I am getting too much choppy voice and high ping response (above 100ms). What is the issue? ATA's at one location are working fine while at other location same ATAs a...
We are having a building powerdown this weekend and we need to bring down the Call Manager servers. We are running 7.0 with a Publisher and two Subscribers. It is running on the linux platform. Since I am unfamiliar with linux, are there any speci...
I need to not have on-hold music nor repeating beep-beep-beep on a certain DN. How can I do this? Thank you.
I'm trying to import a phone into my call managers and keep getting an error. I have attached a screen shot of the error that is in the CM logs.
With Randy WuWelcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn best practices on how to configure and troubleshoot Cisco Unified Border Element (UBE) for the public switched telephone network (PSTN) S...
