Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello Team,TransVM kay (soft-key)is appearing as greyed out in CUCM 8.0.3I was using this key with CUCME (Express) and it was working fine.Recently I migrated users to CUCM and added TransVM key in the customized template. However it is appearing as ...
Dear All, I configured one cisco 3845 router as SRST mode on remote site. The phones are getting registered with router when the WAN goes down. But the phones are not reregistering with Call Manager after WAN is coming up.? Please help me ...
I have a client who is looking into migrating from an analog telephony system to a VoIP system. Right now they're trying to decide whether to go with ShoreTel or Cisco platform. There are appx 250 users spread out over 12 locations. SIP would be t...
Hi,.. I would like to know is there a way I can make the IP phone to dial a call to a matching DN, once the digits are entered in the ip phone but the dial button is not pressed? I will grateful for your reply.
Hi all, Our client is using uc540 with uc500-advipservicesk9-mz.151-2.T2 IOS and CUE 8.0.3. All incoming calls hit AA. It works fine but once a week or two they complain:1) The phones in the hunt group are answering calls by them self. The pho...
Hi all,I seen some ccm configuration directory numbers are configured as startting with "* "like *123123.What it does ? What we will achieve ?Thanks in advance
We need to rec recording for training purpose, ONLY one of the CP-7975G cannot be recorded, as no sound displays. No problem with other phones.We record calls with SANYO JNC, by connecting with the port of hand set, and answering calls with handset. ...
I experienced power failure in my office which made all my servres to shutdown and come up again. After this event I could no longer log on to the callmanager web interface with the username and password. I can log on to the command line interface b...
Hi,I'm having some problems with Corporate Directory on Call Manager 8.0.3.20000-2.I have several types of phones, like 6941, 7942 and 7962 and the only one that works is the 6941.They have the same network settings but on the 7942 and 7962 i can't g...
Does anyone have a configuration link? Are there any gotchas doing this? Customer wants to do simple 4 digit dial between cme and CMthx as always
HI,In a company which has only calls to and from the pstn, no calls go via wan1- i pluged 3 decitated pstn lines to 3 fxo ports ( ex. port 0/0/0 , 0/0/1, and 0/0/2) and i have 3 extensions (admins) ( ex. 100,101,102) and i when the extension 100 pl...
hiiiiiii,can i have same hostname for 2 callmanager servers in the same cluster ? if yes is there any effects for this ?
Hi,I couldn't find the max no of extension that a CME call pickup group can support. Anyone can tell me the answer? I am looking for CME version 8.0 and above.Thanks!
Hello everyone--recently, my customer lost their CM publisher server. After replacing the motherboard, we get a hardware incompatible message (which is guess is common from what i've read)...so we're getting a replacement server. My question is thi...
Hi,is it possible to interconnect a UC540 with a CUCM?I think that it is not possible because I did not find anything in the configuration guide on cisco.com, but I would like to hear it from you guys, too.
