Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I'm looking for anyone with any information on a 4E vs 5E T1. We have a location that is having a LD T1 replaced and they were told they are going from a 4E to a 5E T1/Circuit. The circuit is connected to a H.323 gateway. What changes would be mad...
Hello everyone! Is there any way to keep the internal caller ID and Directory Number the same even after a call is transferred to a new extension? I am trying to keep people from learning the manager’s number. I have masked his number whe...
I am at a loss. I still cannot forward a call off-net from an off-net call. I have checked under service manager, not blocking. Tested multiple CSS settings, everything works as advertised. I can fwd off-net from an internal number fine. What am I mi...
Dear all Master,need help.Device: CUCM 7.0Condition 1:CUCM only synchronize Contact information from LDAP (without password):-CUCM can synchronize to LDAP: CUCM admin>System>LDAP>LDAP Directory...-CUCM can get username from LDAP: CUCM Admin>User Mana...
Good Day All,I need to generate an SEP<MAC>.cnf.xml file for a 3rd party PABX and a cisco 8961 phone.Does anyone have a template for me to follow or a working cnf.xml file for this type of phone?Thanks very much for any helpRegards,Amanda Lalli-Cafin...
Hello,On CUCM 7.1, CSS level 1 users have been given access to System and Emergency partitions and the route filters/patterns have been set up so that Level 1 users can make only internal calls, but the Level 1 users are able to make calls to Mobiles...
I have the following Problem with the call pickup notification: I'll get no notification on the display if a Phone is in more than one pickup group and it rings not in the primary group.Some background infos:CUCM 7.1.3Phones: 7965Softkey: otherPickup...
I have a customer who is having some problems and we want to upgrade them to the latest version of the UC520 software pack. We are most concerned about the CUE upgrade. Their CUE is currently running 3.2.1. Are there any issues with upgrading from th...
Hi,I have an issue that is really a headache for end users. I have CME 7.1 con 4 FXO ports.when any user set a conference (3 parties, 1 internal and 2 PSTN phone numbers), after finishing the conference the fxo ports remains off-hook.If I type "sh vo...
Hi we ordered an ISR G2 2921 router with CME license,It looks like the partner made a mistake and ordered the router with SRST license instead of CME license.As far as I know it is not possible to convert from SRST to CME on G2 routers like we did on...
Hi to all,i have a 2811 Voice Gateway and it is configured as follows:Controller E1 0/0/0 = PRI Connected to Legacy PBX. Clock source is internal.Controller E1 0/1/0 = PRI Connected to PSTN. Clock source is line.The connection to the PSTN shows no ...
Hi,I have configured Single Number Reach in CUCM 7.1(3). The Phone number of the calling party is not displayed in Received Call List in the following scenario. Is this a feature limitation or do we need to do any other configuration.1. DN 2000 Calli...
Hi guys,I need urgent help with a CUCM 6.1 cluster.I just moved the Publisher to a new location, I've changed the IP address, reconfigure the voice gateways and dhcp option.in one remote site, phones get unregistered with error code 13 (keepalivetime...
Any idea whether ICT between 8.x and 4.x will work? is there any chalenges? cud u pls assistThanks in advanceMadan
Hello, I'm having an issue and not sure what the best way is to resolve it with CME 4.1. The phones are all 7970G and the router is 3745 with IOS 12.4-15(T8). With ephone-hunt groups established setup for longest-idle, that part works great. Howev...
