Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi!I have a client with 3 CUCM Servers, and yesterday all the Main Site Phones fail over to the secondary server in the CM Group.The CM Group look like this:1.- 172.31.3.12 (Sub1)2.- 172.31.3.14 (Sub2)3.- 172.31.3.11 (Pub)Rigth now all the phones a r...
Any word on what is going to replace ARC Express. We need to move our attendent console master database to a replacement system and ARC's solution is to rekey everything. This is not a practical solution.
Customer is testing CallManager 8.0(3a) with two CP-7942G phones running G.722. If they use the speakerphone they said it sounds great, but when picking up the handset it sounds bad, like other side is far away. Wonder if this is a SIP 9.0(3) load b...
What is the meaning of LED exclamasion of the server MCS7825I4?, the current color is amber.
I need a conference bridging solution that will support up to 100 audio users at any given time. It could be one or multiple conference calls occurring simultaneously. We have a full CUCM system with two Cisco Gateways.
I'm looking for a system that will make an emergency call without going to a service provider. A couple requirements are:* No ringback* No inbound voice traffic - only outboundI know I can just set up a phone with PLAR, but it really needs to be si...
Need to configure several admins to access the general voicemail box as well as alert them with MWI. I tried alternate extensions and since its not a unique extension it errors.Admin extension 1000General VM box 1001Thank you so much for your help.
Guys,i have CUCM 7 with two H323 GWs attached. the first is an E1 the other a sip trunk to a gsm gateway for cellular calls. im doing all translations on the gateways.all phones have did numbers assigned as their extension and carrier passing four di...
I NEED TO KNOW , HOW TO CONFIGURE A PHONE AND THAT INDICATE WHEN A EXTENSION ITS BUSY OVER CCM 4.1HELPME
Hi I would like to know if I can disable a voicmail box from excepting new messages? I have a person going on extended leave, with a forwarding message, but I know someone will leave a message...People will not listen to the out of office message.......
We wold like to configure voice messages into a playlist and use as music on hold. We would like to set it as a playlist so we can easily add or delete each type of promotional message without having to re record all messages. Is this possible? If ...
Hi,I have two locations connected via site to site VPN and both sides have CME installed. I can dial extension to extension from one location to another location. I am trying to forward all the calls from one extension from site A to site B extensio...
Hello I have a CUCM 7.1.5 and lot of IP Phones 6921 and 7940then when I test the SRST Mode the phones 6921 not register whit the gateway.IOS version: c3825-spservicesk9-mz.124-15.T13.binAny Idea fot it?Regards.
Hi everybodyI have a NME-CUE and I need to send mail notficacion of new voicemail trough SMTP, is this compatibility with exchange 2007? I have the version 7 of CUEThanks Marco
HI ,I have loopback ip configured on my Cisco voice gateway pointing to two subinterfaces (Gig 0, Gig 1). I have a third party webserver.From my voice gateway I need to send an http request to the third party webserver using loopback ipaddress and ge...
