Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, I have 3845 CME with VIC2-4FXO cards, I have already configure and enable caller-id on the interfaces but still not showing the number of the caller. I have tried the PSTN on analog phone it shows the caller number. I do debug vpm signal and sho...
Hi Guys,I am trying to do test in the laboratory with callmanager 6.1 and I have the following problem: I configured the callmanager using the MGCP Protocol and I am using the directory number of PABX analogic. When I start the conversation the IP Ph...
I have translation rule like this below, i understand the rule that replaces the first digit 9 with 4 what is the significance of \1 at the end , I see in some rules it is \3 , \2 etc i am not able to corelate that to anything. May be a silly one but...
Hello group,I am currently facing a slight problem - we recently aquired a company with IP Telephony infrastructure and working toward creating a consistent dial plan.To complete this, I need to find out how many digits is forwarded by telco for inco...
Hi Iam finding high CPU Utilization on Voice GW. 29029: Jul 19 21:31:59.418 IST: %SYS-1-CPURISINGTHRESHOLD: Threshold: Total CPU Utilization(Total/Intr): 80%/34%, Top 3 processes(Pid/Util): 217/8%, 77/6%, 212/5% 029030: Jul 19 21:32:04.419 IST: %SYS...
Hi,I have an issue with a CM4.0 Call Detail Records. I have set the Automatic Purge to delete records that are older than 60 days. However, when I query the SQL database and check CDR from GUI, the oldest record available is only 30 days ago. Any rec...
Hi,I have an intercluster trunk setup between two call managers. How can I define what codec should be used on this trunk? thanks
Do wireless IP Phone 7921 with CUCM 8.0 setup, do we need to purchase separate SW-CCM-UL-7921G UL license for this ?
When i login to the CUE GUI to go through the wizard for the intergration between ccme and cue i am getting JTAPI error(attached is the error that i am getting when i click on next and the second capture is when i click ok on the first error)Any idea...
Looks like there are some 3rd party apps out there that will tie into CUCM and allow you to remotelyview/manage/control IP Telephones. - Has anyone had any 1st hand experience with any of these products? - How dangerous is it to give these products...
Hey guys,I have a UC520 with two AIR-LAP521G access points controlled by a WLC526. I have two ssids created on the WLC526, one ssid pointed to the data vlan (1) and a voice ssid pointed to the voice vlan (100).Devices associate fine to the data vlan....
Inbound calls from PSTN randomly complete. Isdn q931, ccapi, h225, and h245 debugs indicates the calls gets to the H323 gateway and sends the call setup to the call manager; however, sometimes the gateway does not hear back from the call manager, an...
We have CUCM version 7 is it possible to run it as NTP server so routers,Switches and access Points Sync. time with it and If possible how could I do configure this?Thanks and best regards
Hi All,I hoping someone here can correct me and remove my current disapointment with CUCME's call coverage features.I'm trying to setup a parallel hunt group while still allowwing the agents in this hunt group to logout (make themselves unavailable) ...
My apologies if this has been asked previously, I cannot find a similar thread. - Is it possible to increase the log size from the default 100 records to 1000? Or is this limited because of available resources of the device? - If it cannot be increa...
