Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hellowe have callmgr 6.1.the last week we have seen the CDR scheduler service restarting around 00:30 each morning.the RTMT alert page shows nothing but the control center shows the new service start time.Our scheduler is set for continuous loading.A...
HiCan anyone advise how you setup IP Communicator in CCM 7.0I tried to add the device but it does not come up with a MAC address, how can I add the IP Communictor?Any help on the steps would be appreciated.ThanksBill
HelloI have an UC520 and SIP IP Phones, the problem is when I try to dial on Auto Atendat, for example I calling to the bank and when I try to selec one option (Press 1 to sales) does nothing. the same occurrs when I dial to VoiceMail And introduce t...
Is it possible to block incoming calls from certain telephone number in Call Manager? Thanks.
I am running System version: 7.0.2.23900-4. Calling Party Transformations are not taking effect on MGCP GW. The exact same config works if I change the GW type to H323.I am attempting to set the caller-id to 201-201-2000 but it is not taking.The PSTN...
Hi,I'm using CUCM4.2 and CUCME 7.1 with a CUE.I want the CUCME use the CUCM4.2 directory.I've tried to use the command "url directories http://CCME42/CCMCIP/xmldirectory.asp"and "no service local-directory " to disable the local directory.But no suc...
HelloI am trying to find the most effective way to "bulk" change the "user info" and add fields in the "permissions information" under "Groups".I want to make each user have Standard CCM End Users and Standard CTI Enabled.Not sure on how to do this b...
Hi there,I'm building a new CME installation using IOS 15.0(1)XA1 on a 2851 and I'm having problems with the built in directory feature. I've added ephone-dn's and configured a name for each one, but when I go to my phone(s) and press the Directorie...
I am currently configuring phones for a court system on our network. The customer is accustomed to a Centrex multi-line huntgroup and would like to get away from using it. All of the members of the mhlg are scheduled for migration to DID service by ...
I've got a fairly simple lab setup: CCM 4.3 with two phones. The phones are 5555 and 6666.I've also got a 2651XM gateway running 12.3(14). All communication between CCM and the gateway is H323.I'm trying to place a call from phone 5555 to the gatew...
Hi All,I've setup MGCP fax in gateway with CUCM 7.1 and Exchange 2007 as fax server for incoming faxes. everything works as expected, except sometime end users receive multiple faxes from the same source. it seems gateway doesn't send disconnect or b...
Have anyone seen this issue?We are using Cisco IP Communicator v7.0.3.0, use Citrix and Cisco agent in Citrix to handle calls (see attached files)The Citrix are installed on Windows 2008 servers with XenApp 5.0 . 2008 patched to SP2. Cisco agent shou...
Hi All, I managed to establish E1 CAS connection between Cisco 2800 series router & a 3th party TDM IVR. With the following commands,controller E1 0/1/0 framing NO-CRC4 clock source line primary ds0-group 1 timeslots 1 type fxo-loop-start ds0-group ...
Hi all,I'm implementing CUCM in a customer, their segment ip address is rather weird which is 169.254.0.0/16. I cannot ping that segmet from CUCM and if i traceroute the packet is bound back to CUCM.It is hard to change the segment ip address because...
Hello. I am very thankful to have you reading my post and thanks beforehand to everyone helping around. You are doing a great job.I am currently configuring a CUCM cluster.Problem is as follows.We have a standalone cluster with a Publisher and Subscr...
