Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,Wondering if anyone has experienced something similar to this issue.When calling a specific DID extension from the PSTN through a H323 gateway from a landline the call is successful........but when dialing from a mobile (tried serveral providers) ...
Does Model 7937 come with expansion? In order word, can you configure a secondary line on the 7937?Thanks,
Everytime I log into CAR i receive the following warning.* Cluster wide parameter 'Call Diagnostics Enabled flag' is set to false. Hence no QoS information will be generated on calls. If required, please configure the same from service parameter page...
can i have my voice gateway run unity express and the gateway is configured with SRST?if not, what can i do to resolve this issue?regards,Ibrahim
Hi all, I have CUCM 6.1 with over 2000 dn's plus a CME/CUE running on a 2821 for the auto attendant features.Is it possible to have a CUCM dn with a live record softkey that will be recorded by the CUE.I know you can do this if the dn is on an ephone...
HiI have Cisco Unity Connection (CUC) installed at Site-A. I have one more site coming up, Site-B. Both the sites would be connecting to same CUCM cluster and each site would have its respective Voice Gateway. Currently Site-A has Auto-Attendant conf...
All,I have an interesting problem to solve, hope you can help. I have multiple users requiring voicemail and the ability to be reached by their extension, but I have only one 7942 for use. For example:Phone line DN = 4000Joe EN=4001Jane DN=4023Jim ...
Hi I am trying to divert an incoming number from the pstn to anothercompany external to ours and not on our IPT system.My plan is incoming calls hits the H.323 gatway and is translted to an internal extension number which has a CFA to the external co...
How can we reset a forgotten OS admin password?It is CallManager Business Edition - 7.1.3.30000-1
Hi!We have an issue after extract the hard disk of the Publisher. It was installed on another machine by few minutes and them we install again in Publisher.Its working properly but we cant access to https://IP Publisher/CCMAdmin/main.asp in Publisher...
Hi to alli have installed a CME 7.1.3 and i have the following problemOn the (ip phones_all the ip phones(using now 7941,7961GE) in directories buttom its show only Missed calls, Recieved calls, Placed calls.The other services are missingDo you have ...
HiI'm running CUCM 7.1 and I'm looking for a tool (i.e XML-Service) that allows me to see who is logged in and who is logged off from a hunt group.RegardsPeter
I am having a hard time trying to come up with a dial plan that will accommodate a central site and a remote site that involves SRST that will scale for future sites. I have a handful of sites utilizing SRST but they do not use a local PRI at the rem...
Hello!Conference at the CCM 4.2 starts on the phones after 3-5 minutes. RTP stream appears immediately, but voice on the phones is heard after 3-5 minutes.Please, help!
I randomly am having some 7921s drop connection with CallManager and sit at "configuring" for a period of time. Eventually they seem to re-register, but until they do are not usable. Any thoughts on what could be causing this? Thanks!
