IP Telephony and Phones

hi,I want to register 7921 wireless ip phone on ccm4.. but it is not comming in the list of Device > Phone.. How to add the 7921 wireless phone to the list.RegardsNareh

Hi  We have customer who is using Cisco Unity 4.2, which is integrated with MS Exchange for UM delivery of voice messages. Recently there was an error which was related to licensing, that was reported for over-subscription.     The number of subscrib...

Hello,What is the best way to determine the date that a particular ip phone last registered?  For example, say there are several old CIPC objects configured in CUCM Devices>>Phone that we need to clean up to reclaim the licenses.  I'd expect if we co...

I made a ISO image of my DVD (03/31/2010  10:41 AM     3,358,169,088 UCSInstall_UCOS_7.1.3.30000-1.sgn.iso)I can mount the ISO fine in VMWare Workstation 6.5 or VMWare Server 2.0 and install CallManager 7.1(3) fine without running the Media Check.I l...

Hi, anyone know why occurs this error in SIP.000849: May 20 18:37:25.210: //-1/xxxxxxxxxxxx/SIP/Error/rtpAvpCodec_to_voipCodec:Unexpected RTP PayloadType :255 in SDP Body000850: May 20 18:37:25.214://11673/91C0E3929CC3/SIP/Error/sipSPI_ipip_copy_sdp_...

I am trying to create a photo type album application service for CISCO IP Phones. I can only get a single image to display using this code:CiscoIPPhoneImageFile section  Any help, examples or suggestions would be great.

Hi to all,I am testing the dma tool in my lab and i have the following error:- From the ccm 4.2(1), I run the DMA (7.0.2) tool and everything ok.- I install in a new server with the pendrive and the cd cucm 7.0.2 and select ftp where I place the dma....

Hi!I discovered yesterday a problem with Extension mobility and CiscoTSP. The problem is this.  When a Tapi app checks the devices which are connected in this moment, the app asks through CiscoTSP to the Call Manager the status and events of these de...

Hi all,Can the TSP/TAPI software (e.g. TSP-SingleLine-2.2.0.5.exe) for CUCME be installend on a 64bit XP workstation?Thanks,Norbert

I have a site running 7941 phones in CME 7.0.  Our site is reporting that when they resume a called placed on Hold, the phone will go blank after 3-4 seconds.  The phone will then come back up (Does not register like a complete hard boot).  The call ...

All,In my call manager configuration, I have the following setup: Cisco Voice Mail Port, ports name CiscoUM1-VI1 to CiscoUM1-VI16 have calling search space 440_National_CSS attached to them. Voice Mail Pilots configuration, I have Voice Mail Pilot Nu...

I have Fax Server (Brooktrout SR140) connected via SIP trunk to a CUCM.CUCM is connected with a SIP trunk to a 2821 cube which has also a SIP trunk connectivity to PSTN.Find attached a network diagram.SR140 supports FoIP through T.38 fax relay only. ...

HI,I have a CME installed on a router with NO pri card. I have this connected to a AS5300 GW, which is currently working for voip on another PBX. I have configured the CME and can make outbound calls ok, but i cannot get the main number to connect to...

Anyone have an issue with the CS55 headset hanging off a 7960? For some reason the incoming call alert beep in the headset quit working. It works on other phones with headsets and the CME config is identical on all the phones. Thanks in advance.