Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I am encountering a Fax CRC issue with the following H323 config in the Luxembourg:Cisco 2851:Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4(20)T22 Channelized/Clear E1/PRI ports4 Voice FXS interfacesThe port 0/2/0 of the...
I have a customer who would like to have the callmanager 6 web interface (https://server/ccmadmin) not expire and log out after a few minutes of inactivity. Is that configurable? I have been unable to find it in the documentation, maybe i just misse...
Would anybody know of a best practice document that I can refer to for both FoIP and VoIP to be configured on the same Voice Gateway? here is an example. We have 6509 cores with a ccm module that will have 3 PRI (Two for voice and one for fax) how wo...
Dear Voipers We have configured Cisco 2811 configured with Cisco CallManager 6 (MGCP).When I make an icoming call from PSTN (from my Mobile phone for exemple), and then i hang up the IP Phone is still ringing.Can you please help me?Thanks in advance.
hi,I was reading throught the book regarding the upgrade and i have confusion regarding the upgrade via operating system webpage.Is it correct that for example when i install cucm 6.0, the hardisk is divided into two partitions and cucm6.0 is install...
It is happening something rare in my Cisco Call Manager 7 ip telephony platform. When I call a corporate mobile which start with seven (I have the corresponding route pattern created) three digits (004) are added to the number that appear in the phon...
Hi all,I am preparing my CCIE lab and I am trying to get hands on CME. I am having troubles with the call-forward feature on my CME lab environment.1/Considering css configured for a phone line that gives the rigth to forward all your calls on a CUCM...
HiI have a query regarding abbreveiated dailing.Actually i am using CUCM ver 7.0(1)IP Phone: 7940.7945,7960 etcThe problem i am facing is that from Line 1 i can get the abbreviated dailing soft key for speed dialing that i have configured in the ccmu...
Hi,Can any please let me know on how to enable the login and logout fucntion for the IP Phones in Cisco Call Mananger Express.Faizal
My client need to connect a PSTN number [ 22445566] with the voice gateway 38XX; 38XX is used as MGCP gatewaywith CUCM 7.1; do I need to use FXO or FXS card to connect voice gateway for teleco connection, when there is an incoming call from this PST...
Hi,I have a client with 30 users. All using cisco IP Phones. Some users are given International Dialing Facility. This users use FAC.Each users has their own codes.What the the administrator wants to know is,is there any way to know the codes used wh...
We are doing an upgrade from CallManager 4.1 to 6.1. We are running the DMA (Data Migration Assistant). We started the DMA last night and let it run all night and came in today and it was still running at the same place it was when we left last night...
Is there a way to block incoming calls in CCM 4.1 using ANI as the trigger?
OK. Stupid question. My client just gave me a new 2821 ISR that he just ordered from another vendor. He las licenses for CME and CUE. I have never done a "from-scratch" installation of either. My question is, "where do I get the IOS that goes on...
HiWe are using Unified Comm. Manager 7.0We have extension mobility working perfectly fine but i have been asked to check how we can login automatically into the ip phone, immediately after logging on to our laptops/pc's Appreciate the support
