Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Can an inbound pstn caller to a voice gateway receive a busy signal if the end point ip phone is in a different location and call admission has been instituted across locations?
Hi all,I'm a bit confused...I've been testing a 7931 IP phone with CM v6.1.3.1000-16I guess I had the typical problem ("Error Pass Limit") so looking at the posts I found a useful one written by Jaime Valencia explaining why I couldn't transfer or co...
Hello - I am in the planning phase of upgrading our CM from 5.1.3 to 7.x. I am starting this discussion to learn from the issues others may have experienced throughout your upgrade process. - - - -Do's, Don't, compatibility issues, licence issues etc...
Hello everyone, I'm a VoIP newbie and I've built my lab for voice. I've successful Installed CUCM 7 and intergraded my LDAP. I've already configured my calling spaces, and my ext and learned how to associate it with a LDAP account. I'm running into a...
On a single Call Manager cluster (6.1.3b) I am looking for a method for alternate routing between sites in the event of a WAN failure. A translation pattern keeps the calls on net. For example:User at site A dials 914103456029Translation pattern for...
Hello all,I have a problem with auto-attendant on CUE, the problem that when i press 1 -like the script ask- i can enter the digits, but sometimes the call success and sometimes i hear " you entered an invalid called number", How can i overcome this ...
Hi,We have a 2811 router with a HWIC-4B-S/T card that we are configuring for use with Call Manager Express. Though the BRI ports are visible - BRI0/0/0 to BRI0/0/3 we are not able to create any voice ports for these cards. When trying to creat voice ...
I have a remote site with a CUE that is the primary Voice Mail. That seems to be working ok. However when the site fails over to srst. We have two issues.1- when you call another extension and it forwards to voicemail it does not go to the forwarded...
On our test lab, we upgrade a 2 MC7845 (pub/sub) from 4.x to 7.x, then pulled a Raid1 drive to simulate a failure. This crash our subscriber which requires a rebuilt. We pulled it base on assumptions from CCO docs for 4.x and earlier. I started looki...
The Cisco 7960G phone has 6 speed dial buttons but the way our phones are setup the first button has the ext number( line) attached to it and is therefore redundant. We only have 5 other buttons to use for speed dials. Is this normal? Is there a way ...
Customer noticed that the RTMT triggered "LowSwapPartitionAvailableDiskSpace" and "LowAvailableVirtualMemory"alarms on the Subscriber server as well as getting similar syslog messages. This wasn't a problem at the beginning. He followed the instructi...
their is a problem with only select phones displaying ITS on the display and I forgot what this means. The phone functions fine,receives and places calls, is registered to CME, does not reset... overall it appears to be perfectly normal. The proble...
We need share a wired headset across two phones (e.g., different Security Classifications), preferably with some type of A/B switch. Does anyone know of a solution for this?
Where can I find the documentation in regards to setting up an Inter-Trunk connection between two Call Managers? Both running 7.x. Thanks.....
Hi,I am currently installing CUCM 6.1 in a client in order to change his existing old PBX. One of the features he has configured on his PBX is changing ring tones depending on the origin party. If the call is made internally, the ring tone is one and...
