Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
remote refid st t when poll reach delay offset jitter============================================================================== 127.127.1.0 127.127.1.0 10 l 61 64 1 0.000 0.000 0.008 192.77.15.20 ...
Have a customer that wants to upgrade from Unity 5.0 to Unity 7.0. All the documents point back to Uniy 5.0. Question is this a complete install or just upgrading the unity portion?
I'm currently upgrading 2 customer's UCM Cluster's, one is a 6.1(3) and the other is a 5.1(3). I had no issue with the upgrade from 6.1(3) to 7.1, but I'm getting an error from the 5.1(3) cluster when trying to upgrade. These are the same DVD's tha...
Dear Experts,I have PRI line I use it to provide phone and fax lines.The Fax lines are NOT working well specially with long distance numbers.Should I configure the CallManager some how to fix this OR should I configure the Standard ATA 186 itself?
Is there a way to make the 794x phones generate a sustained DTMF tone? For example, I need the "*" key to generate a constant tone for 650ms; however, it is only generating a 10 to 20ms tone even though I'm depressing the key. Thanks.
Hi guys,I have the following scenario:One cisco2801 router running CME. Is posible to register 12 VG-224 each one with 24 analog phones?
Im using a Cisco 7960 with call manager express i have three phones one configured right but the other 2 keep saying TFTP file not found. i have restored all three to factory default and the 2 phones that do not find the file will not let me get into...
Have a need to get the Audit logs (not CDR/CAR) off of the server and stored off box for 3 months.Have not found anything under the options for audit longing for storage location.Is it possible to store the Audit logs on another box besides the CUCM ...
We are looking at a CER 1.3 TO 7.1 upgrade in addition to upgrading call manager from 4.1.3 to 7.1.3. Our plan is new hardware for both systems so we would like to uprade CER first given the backward compatibility and then build out a parrallel CUCM...
Customer has CUCM 6.1 and is using Hunt Pilots/Lists/Groups to deliver AA calls to the Customer Service group. Then these calls often get transferred (assumedly blind) out to another party.The problem occurs when the "transferred to" party does not ...
We just installed a pots line at one of our remote site locations. We are trying to use a four port FXO card to configure the one pots line for 911 calls for this remote office. Our gateway protocol is MGCP. I am not sure how to configure the FXO ...
Hi,customer wants to tag the LAptop MAC to the IP phone's pC port. He wants to do this to ensure there will be no one else who can get connected to that IP phones' PC port except him. I understand we can tag Mac addresses of the Laptop to the Switch ...
Hi all,Could we add CCM users to groups in BULK? If yes , how ?best regards,
Hello,As the title says my question is in regards to using the internal switch in IP phones to provide the LAN connection to a PC. A co-worker is claiming that using the internal 10/100 switch for PC data at the same time as a call is going to degra...
I`v set up a connection between a CUCM6 and a GWA using H323 connection - IP only no physical cable. This GW in turn connects to two other GW`s and finally to a CUCM using MGCP. When I call from CUCM 6 to the other CUCM the call is set up and con...
