Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am using AP 1131, it working [ I am able to associate with laptop ], but in 7921 it show "connection failure error", any suggestion to troubleshoot this problem.
Hi there !Is it possible to have a 7936 or 7937 connected directly to the pstn, without a CallManager (like an analog phone )?Thanks.Andrei.
I was wondering if someone could shed some light on my issue of not being to call out. The sip trunk for incoming calls appear to be working well. I have attached a dial-peer debug and a running config.Any info greatly appreciated, thanks,Craig.
Hi I'm setting up a new voice gateway in UK. We have 3 BRI from BT. The problem is that I cannot pickup the inbound calls. Placing outbound calls isn't an issue.We have 10 DID / DDI from BT.The gateway is configured as a H.323 gw back to our CCM 4.2(...
is it possible when using a mgcp controlled gateway to set the codec preference for the voip side of the call.I know regions can be used, and the intraregion default in service parameters as well. But i'm really talking here about setting a preferen...
For blocking 1900 calls on sccp phones we usually use after-hours block-pattern under telephony-service.What is the best way for blocking particular patterns for sip endpoints ?
HiI am running CME 7.1 IOS 12.4(24)T1 on a 1861 router and have the following issues I need some help with.1. I have 5 extensions numbers 8820 - 8825 with 8820 being the main number. The problem is that when you place a call from 8821, 8822 etc... th...
Hello,I juste want a confirmation about upgrade of callmanager from 4.2 to 6.1 in mixed security mode.Don't we must delete the CTL files on phones after the upgrade of CCM ?I have got the follow informations from DMA :[08:29:58 PM] Beginning CAPF e...
A switch with one voice vlan and a mixed set of users such as IPT users connected to a IPT cluster and call center users connected to a call center cluster. Having an issue trying to deliver opt 150 to them uniquely. dhcp does not seem to have a mac ...
Hi,I have one 2801 (IOS 14.4.15T8) with one BRI the problem is that many calls (inbound ou outbound) trough BRI gets droppedMy config:network-clock-participate wic 0 network-clock-select 1 BRI0/0/0interface BRI0/0/0 no ip address isdn switch-type bas...
If 7960, 7961 and 7965 with sccp image.I found a doc at cisco website about convert sccp to sip for 7940/7060.I guess my question is that can this step apply to 7961 and 7965 or the rest of 79xx series model???http://www.cisco.com/en/US/products/hw/p...
When a voice gateway is in MGCP mode, "sh isdn ac" doesn't work.Is there a way to get similar information ?The closest I've come up with is "sh voice port sum" (Which isn't great)Thanks,GTG
HiI have CUCME 7.0 on 2811 router with 8 isdn lines.From past one weeks time users are facing a voice quality problem and when i enabled the debug ISDN q931 on the router i have noticed error keep repeating " unassigned number /un allocated number "A...
Hi, I have a route-list that consists of SIP trunk, regular ISDN/Analog trunk, I want outbound calls to use SIP trunk as long as it permits and ISDN/Analog trunk acts as back up.What I am not sure is how CUCM detects SIP trunk failure? I don't see SI...
I'm struggling to find the part number to use for a Unity 4.x to Unity 7 upgrade. The original order was licensed as UNITYV4-50USR, does anybody know what part number I should be looking at?Any idea of inidicative list price too pls?Jed
