Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have a voice application I need to test. It needs to run on the inbound dial peer for a call that is destined to an FXS port on the CME.I tried to make a voip dial peer with "incoming called-number ." but this does not work, instead CME uses the h...
Hello,There is a faulty drive on our MCS 7845 Unity Connection server (red LED flashing).This server is in a cluster and is the Publisher and currently running as Primary. I'm assuming the drives are in RAID 1 configuration and that they are hot swa...
We have UC 2.1.1 and the time when a message is left is off by one hour, how do you correct this is the server time is correct?
Where do I find the Cisco_Manufacturing_CA for a CME and ASA phone proxy install?
Can anyone comment on what type of signaling is used between an IOS gateway and an Indyme Connect platform meaning FXO, E&M, or FXS? I have searched online and all I can find is the use of SIP integration and I am told by the group who performed the...
Hi all,because we run in an extension mobility bug with our current version of CUCM 6.1.2 we wanted to upgrade to the engeneering special 1112-2 where this bug is fixed.After I logged in to the OS-administration Screen and entered the information for...
using access to extract some information from cucm 4.x.cannot seem to find the translations and related information.can anyone provide information on where to go to get the information about translations within the sql tables.Looking for table name a...
hi,we are currently using CCM 4.1, and going to upgrade to 7.0+ soon. In CCM 4.1, user firstname and lastname fields (in Global Directory-user configuration) only support characters in the range of 0-127. I'd like to know if the new version support m...
after changing IP address for both server, I'm unable to start the database ...dbreplication does not start it....suggestions please
Hi all,Here is the description of the scenario :A calls B in order to be transferred to C.,so, B calls C. At this moment we have the call A-B on hold and B-C active. B , for some reason, put C on hold and come back to A (to verify some thing). At thi...
Dear AllI need to know which types of non Cisco Phone Models that support to be added on CUCM 6.1 as a SIP PhonesThanks
i have ccm 7 and ccm 6 in two office's i want to do IP trunking between the two ccm's need help to configure it..can anyone provide me steps.thanks
I have 4 port ISDN BRI and the configuration follow attache. I try to call between site and the ISDN BRI its work only 3 port of 4 port. Currently ISDN working I use command "debug dialer" and test call by command "isdn test call interface bri 0/0/2 ...
The CUCM my company is interconnected to the network of a telecom operator with a link QSIG E1. Our internal network we can call external numbers via the QSIG link. But we can not receive the calls from operator through this link. debug q931 give me:...
Hi everybody,When I purchase a CISCO2821-CCME/K9, do I need to buy extra licience for each IP phone (eg.CP-7941) ? CheersMan Leung
