Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I need integrate the Cisco Call Manager with a Cisco Call Manager Express. Do I need to do the following tasks?* In the CCME add a new dial-peer type voip, with the session target the IP Address of the Call Manager.* In the CCM add this CME as H.32...
Hi, I am implementing CCME 4.3 and I would like to disable the following to appear when services key is pressed: My Phone Apps. Is there any way to do this? I configured no phone-ui speeddial-fast dial under ephone but I am still getting My Phone App...
Hi people.It's possible customize the ccmuser? My customer wants change the Logo Cisco and put his logo.ThanksPeterson
I am having a problem where a call comes in and it will not match my incoming called number . dial peer. I am switching them from an old fax solution to Xmedius.Basically if I call XXX-XXX-1734 (one of their fax numbers) it will not route to the inc...
Hello, Hope someone can help me with this scenario. We have a user on an IP Communicator call at home with ext. 1234 and he gets another call and his secretary in the office answer ext.1234 which is on her phone. When she answers ext. 1234 from he...
hi, i have a CUCM 7.0 working with a 3825 (h323 gateway). The problem is, the MOH only works between ip phone extensions of the CUCM, with calls from or to PSTN, there are not MOH, and the remote user only heards 3 beeps. How can i solve that?
I have three location A ,B and C , we are using cisco unity 5.0 and callmanager 4.3 in central site (site C) as a centralized model .remaing two remote locations are connected on central site. In (remote site A) we have FXO and in Remote location B w...
Hi Pros, I need to forward calls from a specific phone number to another gateway;however, the first gateway keep drop the calls.There are the two dial-peers that i added the the first gateway:1. dial-peer voice 994 pots preference 2 inc...
Hi All, I am trying to find out who called certain pattern like 911 and international call. what is best report I can choose from CDR? I chose route pattern report but it is utilization and doesn't show who called to these pattern. any suggestion wou...
Hi all,We have a problem with the configuration of h323 gateway. This gateway is a Cisco 1861 with 4 FXO. The calls what enter in fxo port, the phone rings but cannot established call. The command "show call history voice brief" display this error "n...
Is it possible to have the second line button on a 7941 bring up the speed dial menu as appossed to just dialing a speed dial?
Hi,I thought this would be easy but I can't seem to created a shared line for a phone. I am using CECMBE 7.0 and keep getting this message when I try and create a second "shared" line.Update failed. Shared Line feature is not supportedHow do I enable...
Hi,We are setting up CUCM 7.0 & have integrated the same with voice gateway Cisco 2821 using MGCP.Now we are testing the communication link (PRI - E1) from the router by doing a test call.<strong>Problem: We are not able to make test calls from our v...
Hi guys, does any one known how many UC500 can be interconnected over a WAN link.I'm considering to interconnect up to 15 UC500..Any comment, document or experience will be appreciated.All the bestDavid.
Hi NetProI have the CUCM with Exchange Unified Messaging through a SIP trunk.When the user call at 5400 the call go through route pattern 5400 at Exchange UM and work fine.But when i call at 5400 for PSTN the call is ending by gateway.i have this con...
