Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello I am using a UC500 with all the 8 FXO unused.I need to connect the 2 FXO to 2 TV. User want to hear from the Phone to the TV.I had already manage to configure one to one connection between phone and TV, but the customer require many to one (mul...
Yeah, I know.. it sounds goofy. The customer is requesting if this would work.IP Phone with extension x4000VG224 port with x4000 (shared line)The idea is that the customer can have the IP Phone in the living room and some analog cordless phone in ...
Hi all-i'd like to set up and alert so that I recieve an email whenever a phone registration request is rejected. I see the custom tab in "Alert Central" in the Serviceability tool, but can't figure out how to actually add anything to it. I get ema...
I am confused by what phones support the 7914 expansion module. Specifically does the Gigabit version of the 7961 support it? I am not having luck getting it to work so far.
I have a ip communicator configured in the ccm to forward the call when its busy, no answer, no coverage, not registered,etc. The call is redirected only when the ip communicator is running on the computer. If the computer is off or if the ip communi...
I have a vg224 version 12.4<20>ya3 configured for sccp. I can put an IP phone on hold and pick it up on an analog and all works OK. The problem is I get a ring cycle on the phone that initiated the hold. Can this be turned off?Burt
Hi Guys, I am having this long problems of my cue rebooting. I tried to enter the cue environment from my router (cisco3845) for the 1st time by issuing the command "service-module integrated service-engine 3/0 session". I am using cme 4.2 and a comp...
Hi!I have a strange problem with my Erisson MD 110 and CCM 4.3 & 2811 (MGCP). MD110 connected to 2811 (E1 QSIG), 2811 registered as MGCP gateway. I find out, that no voice in both direction, when calls occupied timeslots after 17. sh voice call summa...
I am trying to upgrade call manager OS from 2000.4.3a to 2000.4.6,however when I double click the exe file that i download from the cisco forum, it always fails to extract, and the error message is " the content of this file cannot be unpacked. the e...
Hi How can I run a report in CCM 4.1.3 and nity 4.2.1 to find out the configured users and extensions?Thanks,Randall
Can anyone tell me if you can incorporate faxing with Unity Connection 2.1.0 and if so to what capability? Can we use it like like a fax server?
Hello!I am trying to install UCCX7 on one of my lab servers, which is a HP DL320 G2. This server is the hardware equivalent of the MCS-7825H-2266, which is supporting OS.2003.1.1. The only thing i have changed in the HW-configuration is that i replac...
We are configuring an IPt network. the switch is a 3750 and the phones (5) are 7942. the strange is that 4 phones are ok while the last phone is not able to get an ip address and the configuration. the DHCP is in the UCM. The port where is connected ...
Hi,i'm currently doing a proposal regarding the phone extention migration/extend,which's from 4digit to 5digit. Trying to get relevant resources from Cisco but counldn't get it. Any expert can advice any URL or what's best practice for such migration...
i have a client that wants to use a vg224 with sccp and h323. The sccp so that features can be used on 20 of the ports and 4 remaining ports for T38 FAX using H323, does anybody know if this is a valid configuration when the gateway is specified as s...
