Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi netprotians,Can I ask if anyone has tried connected IP phones or ATA to a DC power supply.From the Phone data sheet (E.g 7945 link below), it mentions that the power cube is a AC power supply and not able to connect to DC. But would anyone know if...
I have a 2801 ISR as part of my home lab with a 64Mb Flash ATA memory card. Not enough to support more recent versions of CME. The smallest size I can buy at circuit city is 4Gb. The cisco stuff it overpriced so I was wondering if the 2801 will r...
I installed a new T1 card (HWIC-1CE1T1-PRI)to Cisco 2821 (having CME running on it). The router didn't recognize the card.They first told me that i need to have DSP module (PVDP) installed. After i confirmed that it's installed they said i need a re...
Hi,can I configure Call Manager 4.3 integrated with the Active Directory to search the users with different OUsRegards,
I have about 20 of these warnings, overall we have about 1500 phones/users on 4.1(3)SR6. Will it mean they won't export/import to CallManager 7.0(2)?Row: 5738 SQL error: -746(35317) Error executing "update DeviceNumPlanMap set fkDevice='39fca740-6e...
Hi All, I am using CUCM 7.0 and want to translate the extensions that start from 3 (3XXX) to main number. I am using MGCP and can't use translation profile in the gateway. How can I accomplish this by translation pattern in CUCM? thanks Alex
Hi all, I have CUCM BE 6.1 with gateway 1861 with 4 fxs ports, configured with mgcp. is it possible to capture and callpark a call from a connected analogical telephone in a port FXS? Thanks a lot
Hi Guys,I just configured a H.323 gateway in Brasil, it works fantastically outbound, but the in bound calls get to the call manager only to receive the error message "check the number you dialed, blah, blah". I know this is a CM error as it's in Eng...
Dear Net Pro Team members,We are running VOIP between CME in 3 different cities i.e. Riyadh ,Jeddah and Dammam.We are using an ISP MPLS CLoud to reach each location. We are using Wireless Point to Point to reach ISP MPLS cloud at each location.From l...
When the user trying for conference, the 7960 IPPhone get reset, we have configure max conference session as 8, could some one light for 8 conference session how many user can make conference call at a time.How to troublshoot conference related probl...
Hi,I have found that deskphone control with CUPS does not work when E.164 numbers are configured on the lines associated with the clients. And MWI does not work with E.164 configured on lines. So E.164 on lines seems broken in many respects.Anyone kn...
Hi all,I have got a requirement from one of my customer.his pilot number is 17710000 and his direct number is 17710123 (123 is his ext).now he wants me to configure that if he press 0 and then dial his mobile number then on his mobile screen his pilo...
Could please let me know how to change Admin password for CCM 5. x in GUI or CLI level
We have clustered CCM 5.1, and sometime some lines become unavailable and give the called fast busy tone. The only bad solution I found is to delete the line from the phone and return it back!!! Is there a good solution for that case???Please advice.
Kindly provide me the steps to process user , Corporate directory bulk upload for CCM 5.1.
