Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
we will add one callmanager Subscriber in the callmanager cluster 4.1(3) with 3 servers total(one PUB and 2 SUBs), the base OS is 2000.2.4, and updated with 20004.2 and 20004.2sr16.my questions is: can we starting with higher OS base version 2000.2.7...
How I can see realtime who have enabled speakerphone on Cisco Phone?
Hi there,I have the CM4.2 in cluster in the main office... Now I have a remote site with 3825 connected to a Avaya PBX through an E1Now I'm in doubt:- I created a H323 gateway with the 3825 IP address- I created a MGCP for registering it's E1 interfa...
Hisorry if it might has been asked before but i have this case:i have a TWO 7835 MCS servers and ONE 7816 MCS server CCM version is 6.1I want to use 7816 server as publisher and i want to configure this publisher as datbase server only I WILL NOT act...
Hi all,I am planning to do my first IPCC enterprise (7.5.1) installation. I have experience with IPCC express. Now I am going through the tons of documentation and find it little bit confusing since there are bunch of now components which I don't kno...
Hi ,Is there any way to view what all lincese files have been uploaded in Call Manager from CLI mode?Secondly,if possible can we download from CCM ?regds,aman
After our recent upgrade to CUCM6.1(2), we have noticed three failed 7935 spider phones.The failed phones all exhibit the same symptom - audio is one-way. Nothing can be heard from the speaker on the 7935. When we swap the device out for a spare 7935...
Hello, it is a possible thing to change the number of time a phone rings for one person in UCM v.7.0?
I have the following config main part is showntftp-server flash:ATA030203SCCP051201A.zup!ip dhcp pool DATA network 172.16.0.0 255.255.255.0 default-router 172.16.0.1 dns-server 200.66.96.4 200.66.96.3!ip dhcp pool TELEFONOS network 192.168.0....
I'm not sure I'm going about this the right way. I have a system that dials across an IP WAN connection into my CME. It dials 1001 which I have setup as the number for an ephone-dn. The system automatically prompts the user to press a button to ac...
Hi,I have experienced a hang on the extension mobility service. I configured it correctly and can login and logout. I experience a hang on logging in and out more often than being successful. Is it possible that this concerns low memory resource of ...
When adding a VG224 gateway using BAT, all gateway names and user display text strings are being loaded in UPPER CASE even though they are in Mixed Case in the .CSV file. Any ideas?
Hello,if got one 7940 that is not able to load its firmware. It curretly reboots constantly showing:[Universal Application Load 2000-2007)Configuring VLANConfiguring IPCopying to Bank1Load upgrade complete..reboot..All phones are loading there config...
Hi, When the phones are registered with CM4.2 they can call to a pbx extension through e1-qsig... But when I break the link and the SRST feature is online I cannot access that pbx extension...Any help ?Thanks.Andrei.
How I can collect this info? Can anybody guide me?
