Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Is there a way to import CDR records into UCM6.1? I have exported CDR Data from a CM4.1(2) that was exported to CSV and would like to get them into UCM6.1, and ultimately export to a billing server. Any creative ideas would be greatly appreciated.
I'm running on CM 4.1(3)sr7. MeetMe works for all of our sites except one. It has worked before. When a user tries to host a meeting they get a fast busy. In CM under services>media resources>conf bridges the status shows "not found" for the troubled...
Hello everibody,I'm using an ATA with UC520 for FAX handling and is working correctly.The codec I use is 711.Now I want to enable the second port on the same ATA and apply an internal number to it.I tried with button 2:num but it doesn't work.If I li...
We are in the process of installing Call Manager. We have a 2851 gateway with a VWIC2-2MFT-T1/E1 card in it that is connecting to a Nortel Option 81. All external incoming and outgoing calls go over this connection. The Nortel is providing the clo...
HiIs CCME 7 support parallel Hunt for sccp phones??
I have a T1 CAS that needs E&M-Immediate-Start hence the H323. Can someone look over my config as I cannot make or receive calls.
Is it posible to define several number ports in voice register global? I have already register a SIP trunk with a SIP provier but I can't make calls.The provider told I need to open UDP an TCP port from 5060 to 5090.In the option "voice register glo...
I have a phone, that when the hand set is picked up, I want to automatically dial an extension. This phone will only be used to dial this extension when the hand set is picked up. We are running Call Manager 6.1. Is this possible, and if so, how d...
i have a cme version 3.3, running in a 3640 router, with the lastest ios, with 128 ram and 32 flash, and i want to upgrade the cme to 4.0 or later if it is possible, but the flash is too small, so i installed two compact flash each one of 16M, i woul...
Hello,We're running call manager 4.3 and we have a cisco ip conference station cp-7935. What is the maximum amount of partipants/connections it can support at 1 time?
Hi all, Please help me to customise the background image for the cisco ip phone series 7971,7961,7945 phones. Nahas
Since we have to prepare for the migration of our traditional PBX to an VoIP infrastructure we just started gathering basic knowledge on VoIP communication principles and product specific features. Since we do not have access to an test environment w...
I have two publisher from two different cluster. And now I want to change one of the publisher to be the subscriber of the other one.... can that be done without rebuilding it? Its for call manager 6.1.2. thanks
Hey all, we have a 7975 with a 7916 module. We upgraded our CM 5.1 code to support the module and it see's it, we select it on the device.The expansion module shows numbers from 1-14 for SD but if you enter anything after SD 14 it's called "abriviat...
Hello Sirs,I want to ask some question about DID;1- Is DID idea is the PSTN will send last 4 or 5 numbers from the full format number like that 33401234 is the pstn will send to me 1234.or2-this service will force the PSTN to send the called number a...
