Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,Can you tell me, how can I make line on a phone be inactive, when the phone is in unregistered state?Best regards
Hi, we have a PRI T1 with CUCMBE 6.1.2 and 2811 GW. Because now there are two companies in the same office, they want to give access to only 4 channels from the PRI to the second company phones(so that they should have maximum 4 concurrent calls inco...
Himy gatekeeper have a prefix 513that is target to a 10.240.140.X (this gateway is connected to a pbx siemens for the extensions 513XX and have all dialpeers, i`m openning a new office and i want to translate a few extension 51345-88 to a callmanager...
The URL of Personal Address Book of the Cisco call manager 4.0 is the same for the Call Manager version 6 ?
I need to know the function of "DAT-USB-EXT-72=" in a CMM server.
Hello,My problem is this one:On a Cisco H323 gateway, I receive calls with G729 Codec from a VOIP Operator. I have a tcl script like an b-acd script for this incomings calls. The problem is that the audio prompt are encoding as G711ulaw, so I can't h...
Hi Has anyone used a IP based coin Telephone with CUCM?Like for internal calls it will use CUCM services and for external calls will go through PSTN line connected.Has anyone done this before?Any help appreciated
I am deploying a CUE module which appears to have come from the factory set-up with CM licence pre-installed. Is conversion to CME possible?I have read some other posts which state it cannot, nonetheless I have taken the opportunity to ask anyway jus...
hi,I config basic ACD, in IPCC 4.0 and CCM 4.1 , however ICD status is not found, ICD_1701 , but RP is registered, anybody can help me , why ?Thks
Dear all,We have full cisco unified communication enviroment, and everything is running smooth in the head office, but we have two remotes branches one is 1 Mbps DSL connection and the other is 1 Mbps WiMaX connection, we have one ip phones in the fi...
Does anyone know where I can get a copy of the UKNP for CallManager 4.3, I have an old copy but it doesn't contain the new additions.
I have a DID coming in on an FXO port which forwards to a CTI route point that forwards to a call handler in Unity. When the number is dialed it takes about 5 or 6 rings for the AA to answer. Is there a way to have this answer immediately?
Hi,I have an IOS H323 gateway in between a CallManager 6.1 and a PBX with a H323 / IP card in it.When I make a call to a PBX extension, the PBX updates the CallManager with the Connected Party ID.Is there a way on the gateway to ignore this update fr...
We would like to be able to dial a 5 digit extension and forward it to a 800# via a translation pattern. The problem we are having is we don't want our users to know the call is being forwarded off-net. We currently are blocking the Caller ID via the...
HiOne of my client wants to use a IP based video door phone which will be connected to CUCM, and the video will appear on a soft phone. Any recommendations?? Has anyone done this kind f setup?Any help is appreciated
