Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi all,Lets say I have 5 phones with a common Shared Line Appearance on each one with the "Busy Trigger" line setting on the line of each device set to 1.Now a call comes in to the SLA and it rings on all five phones and someone picks it up on one of...
I know that the maximun ttl for an ip phone to get registered in a ccm is 150 ms, but for a gateway to register in ccm is the same time?what happen if the time is like 400 ms from gateway to ccm?
Goodmorning,I am making a proposal to introduce the Cisco 7906 and 7921 in an existing CCM 4.1 environment (4.1(3)-sr3d). CCM version is included in the attachments.I have seen that devicepacks are needed, although I cannot determine which packs are ...
Hi we have a single MCS 7825 call manager and we have found that the CCMAdmin page will not display when we browse to it. Is there a particular service that will need to be restarted via the console or will a reboot be required? All other funtionalit...
I have a scenario, suppose there are 2 extensions - 100 & 101. Now when a call comes in & ext 100 doesn't answer, it's forwarded to ext 101 by CCM. Now if ext 101 doesn't answer, is it possible to forward it to ext 100's Voice Mail?
We recently configured our CallManager 4.1.3 with route patterns to utilize tollbypass in our remote facilities around the US. If our wan link goes down because of power or other issue other offices cannot dial the number programed. Our route pattern...
I keep getting "channel-group 0 is already defined "here is the configcontroller T1 0/3/0framing esfclock source internallinecod B8zschannel-group 0 timeslots 16-23when I add pri-group timeslots 1-15,24I get "channel-group 0 is already defined"What s...
Can we configure conference on router 3825 bundle, CME 3.2 with UC500 on the other site through PSTN?Please advice. ThanksBudy
I am VERY new to CME/CUE and VERY VERY frustrated. Does anyone have any ideas how to reduce the 4 second delay between when a call is not answered (on CME) and is sent to CUE? Please advise. Any assistance would be appreciated. Thanks.
Hi Guys, I'm looking for the OS image (the operational system in ISO format) of CallManager 4.2, but I didn't find in Cisco website. I've just found OS upgrades/patches! Is there a special place in Cisco website to download the OS in ISO format? Our ...
Hi TacI need install CCM 4.0(2) in a 7835-H2 server, but I don't have the hardware detection for this server, have only the CCM 4.0(2) software.how to can install the S.O. without the HD cd's?wWho software I need for install the machine manually
Hi All. I have just installed a CUCM 6.0.1 System . I have configuread a 7961 Ip Phone for my receptionist. I whish that who call receptionist, hear music on hold while the phone ring for the call?I know that if I use tcl script on voice gateway I c...
Has anyone else encountered a problem in which the 7937 conference phones unregister? On the phone itself, it will drop a call and then sit there with a Configuring CM List message. In the CCM server's event log, I see errors showing Device Transie...
On my 3745 router, when I try to add more ephone-dns, I get this error*Mar 3 22:42:23.764: %DIALPEER_DB-3-ADDPEER_MEM_THRESHOLD: Addition of dial-peers limited by available memoryDIALPEER_DB MessagesThe following are dial peer configuration error me...
I am having a heck of a time getting MWI to work on a 2811 with CUE. Running CME 4.1 and voice mail works (pilot #) and I can leave msg but no MWI. Right now when I dial the 4-digit MWI on dn I get a busy. Any help would be appreciated.The ephone-dn(...
