Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
6.x Upgrade When upgrading to a version that requires a specific previous version do you have to upgrade the inactive partition to the required previous version first?Case in point:Partition VersionsActive Version 6.1.2.1000-13Inactive Version 6.1.1...
I have an 30 channel isdn connection and also an FXO card connection to PSTN on a 2801 gateway. because 2 companies are sharing an callmanager express gateway,I need to seperate users so that 1 company can only dial out of an FXO port and the other c...
I am ordering a PRI to use on my UC520. The vendor has given me a form to fill out with a few questions that I am not sure how to answer. Considering I am using a UC520, what should I select for:1) ISDN Version: Nat1/Nat2/NT DMS 100/5ESS2) Hunting:...
Hi,Further to previous conversations, I have tonight upgraded our customer's CME to 4.3.0.0 in order that they can make use of a newly purchsed 7937 handset. Having followed the instructions posted within other conversations, I believe that the confi...
Can anyone tell me what the required SRST OS version for CUCM 6.1 is...? Regards,Raju P
hi experts,i have followed the admin phone guide for customising the 7941 Phone background. still not workingi created the 2 PNG full and thumb as per document using paint. only that options for the grayscale to 16 bit , there is no option to do it. ...
I wanted to restrict inbound calls in CCM 5.1 from a specific caller ID (recieved via PSTN), my setup has MGCP gateways with centralised dial planany way this can be achieved in on CCM o GWs, i went through certain posts on Internet but no help, look...
I am facing a problem with ccme call forward.I can call forward through 7912 but cannot call forward from 7940 phones. After forwarding i need to put # . how i can remove the # and rectify the call forwarding for 7940 phones. I am attaching the confi...
We're going to use a VG224 with MGCP for mostly fax and modems (one analog phone). What are the benefits of going with Loopstart or Ground Start? Any negatives with either?The only think out of the ordinary is for faxes, if the fax machine is busy ...
Hello, I've been having this issue for some time now to no avail. I have a pure IPT solution running in my office. I have two 4-port FXO cards on a 1760 router. I have IP Phones with directory numbers 1016, 1004, 1006, 1023 and 10001. I want IP Phone...
We find in rtmt that the following alert pop-up."Call Manager heartbeat rate below 24 beats per minute. Current heartbeat rate is 20 beats per minute."What is the possible problem to ccm server?
if anyone could help, i'm having problems when tranfering external calls, if unanswered they are not going to voicemail, internal ones are, if anyone knows the fix it would be appreciated
Hello,I have a 2851 router with E1 interface connected to an ISDN network provider and a BRI interface connected to a Sony PCSA-B384S Video Conferencing unit.I want the VC unit to be able to dial via the BRI circuits and "break out" through the E1 (i...
hi. I have CCM 6.1 and TSP connected over h323. How I can transfer at a proceeding call a phone number which have given out to me TSP?
Hi guys,So I'm setting up this UC520 and it is pretty much all default out of the box. If you leave a voice message for one of the users there is no indication on the phone that voice mail is waiting for the individual.So I log into CME on the phone...
