Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,I have a 4506 with a module with 10/100 ports, WS-X4148-RJ45V. And when I plug in an 7961G-GE, there is no power. If I use an Power cube, the phone will come up and will register successfully.If I connect a 7961G (without GE), the phone can power ...
We have some 7911 Phones with CUCM 4.2(3)SR2.Phone A calls Phone B. Phone B take the call. If a Phones press the "Monitor"-Softkey, the microfon in the headset become the status of dead. Nothing is to hear at the other side. But packets are still rec...
Hi,I am integrating Nortel BCM400 with Cisco CCM 5.X. I have a 2811 H323 gateway. I need following information:1. What type of interface there will be with 2811 (i.e. T1 or an E1 interface).2. What type of protocol (Primary ni, net5 etc)If anyone has...
When I try to add a phone it gives this error:Error InformationAn invalid parameter was passed during processing. (8)Details:Error No. -2147219960 (0x80040608):CDBLException Dump: [Invalid parameter]any idea?
In TCL AACallers must press 5 (or another number)Then dial extensionIs it possible to dial extension directly without pressing 5?Hunt groups must stay thereTHANKS
Hi, How can I know the maximum number of IP Phones a CCM 4.1 can accommodate consideering the fact that it does not require device licences to register each phone?
For DISA setup, I'm trying to get the default clid_authen_collect script working. When I call in (over voip dial-peer) I get the enter account number, then enter pin number prompts. and after entering user 1001 and pass 1001 respectivtly (with # te...
which TCPs are use cisco SOFTPHONE to communicate with cisco call manager 5.2 ?
please tell me how i add the ATA 186 SIP in call manager 5.2 i am trying to add it as a new devcie but it is not taking SIP protocol its only taking sccp automaticaly please help to solve this
Hi,Is there a way to monitor the status of the manager line without using the console? Like a Speed Dial BLF or something?./G
Is there any way to find which signals are coming from PSTN(Telco)side? I have a FXO disconnection problem and almost tried every thing. Please help.Regards,MAR
I'm trying to get the 'clid_authen_collect' built in script working. I continue to get the below error. " enter_account.au errno=0=Unsupported samples per secondpr"I used Audacity to create prompts with below specifications:Default Sample Rate: 80...
Guys..I'm connecting two CCM cluster with SIP Trunk. And both LDAP pointing the same AD server. I've got two problem here:1. The receiver phone showing unknown number for intercluster call2. The caller phone not showing the called name if i setup cal...
Hi,Can someone points me to a good T.38 vs Cisco protocol for fax-relay ?Which am I suppose to choose ?Thanks!
Hello All,I'm new to VOIP technology.We are about to implement a SRST(2851 router) system at a remote site.The remote site is going to use 70 IP phones and 30 analog phones. We have two VG224 gateways to connect 30 analog phones.Does that VG224 supp...
