Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I recently undergone re-IP of all our servers in the lab. After that, i can't access CallManager 4.1.3 web pages. Even locally it can't open it.Please help.Thank you,Ricky
Local 7-digit dialing fails from Mitel PBX to MGCP controlled gateway PRI. Extensions dialing between the two networks as well as long distance dialing all work fine. On the q.931 debug I get a failure that says " cause i = 0x80A9 - Temporary Failure...
Having an issue with timestamps on 7931 phones. They show GMT rather than local.Have the load from the matrix and have gone through the troubleshooting guidesa couple of times. The load I have is SCCP31.8-2-2r1. Anyone have a known working load. Thes...
I am trying to implement Click2Dial for an Intranet using a proxy user. The intent is that when a user clicks on a phone number link, the call is made automatically using the proxy user's credentials. I am trying the following three different metho...
Dear all;I have two CM servers 5.1 (Pub & Sub) with two sites each server in a site (clustering over the WAN); and I have two CM groups one for each site (CM_GRP_site1 Pub then Sub) and (CM_GRP_site2 Sub then Pub)Today with no reason the numbers (DNs...
I am attempting to install new 7941-G-GE phone and all I get is the green speaker light and on a regular basis the handset, lines and mute buttons will blink. At this same time apparently it looses the connection to the switch. The LCD has not disp...
We have a QSIG CM and BT Switch. Certain calls get connected while some calls get a Cause i = 0x82E6 - Recovery on timer expiry message Below are two isdn q931 debug outputs:Working:Router1(conf-serv-h323)#Mar 13 19:00:18.474: ISDN Se0/1/0:23 Q931:...
We are running CM/Unity 4.2 with IPCC and receiving harassing caller that I am looking to block. What is the easiest way to do this. I am far from a voip system expert, I am learning as I go along. Any help would be greatly appreciated.
Hi everyone!I have a request from a client who wishes to integrate the Microsoft Communications Unified suite using Cisco Vioce Gateways with SRST feature to give survival to Microsoft Office Communications Server 2007 voice feature.Could this be pos...
CallManager 4.1(3)Calls to/from PSTN are dropping intermittently. Internal calls for same cluster is fine.No event viewer messages on the subscriber server. Gateways are two Cisco 3745 with 2 PRIs on one and one on the other. Nothing in the GW logs.G...
Are there any known issues using Mozilla as a web browser for CCM The initial pages seems to open fine but any search or change/ add seems to throw a lot of errors Narayan
Is it possible to create an announce-only mailbox in CUE 3.0?We need a box that plays a custom greeting but does NOT offer to accept an incoming message. We tried setting messagesize 0 but that's out of range.Ideas/Suggestions?
Hello.We have a CCM 6.0(1) in production that few days ago was shutdown improperly. Now, on boot, it asks for a root password (I guess in order to give maintenance to the file system). Any idea about what to do??? (We've searched for the password a...
hi all,i'm configured IPMA with proxy line to a manager and his assistant, but the problème is when someone call a manager the call is not routed to assistant automaticaly, the manager phone ring 3 or 4 time and then the call is routed to assistant....
Hii experts,,When I dial throught the analoge line in the VG and the other party hang up the the his phone, if I letft the line up hte call will not end and the analoge line port will still up for along time ..PLZ if ther is any config. in the VG to ...
