IP Telephony and Phones

i need to know the part number which i can use to order the the cme4.1 i need the part number and the cost

When I change a user profile from one partition to another, Callmanager still forward calls to the old partition the phone was in hence the call fails since the phone is no longer in that partition.I used the route plan report to delete the old parti...

Hi,I am experiencing a weird thing. In calls that are received from the PSTN into a NEC NEAX 2400 PBX that are inmmediately forwarded to a Cisco IP Phone on a Callmanager 4.1 cluster, the call is succesfully established, and both parties can talk, bu...

Hi everyone,now trying to setup some cameras and having a slight issue. i have 2 VT cameras setup as well as a 7985 phone. single calls work meaning im seeing video when i place a call from one phone to the next. if i try to conference however, the v...

I'd like to convert my phone to use Attendant Console. I have an existing extension that I need to keep x65013.Now, I created an AC Pilot of 65013 and changed my line to be 65210 (b/c CM won't let a DN = AC Pilot). I kept my line appearance = 65013...

Hi expertsi have configured forced authorization codes and works fine except that after entering the code, the phone continues showing "Enter authorization code" while the called phone is ringing. There is silence and you only realise that the call h...

CallManager 4.1(3). Here is the scenario. Calls from the PSTN hit Unity-PSTN Caller Dials Extension-call transferred and answered on PhoneA-PhoneA transfers to PhoneB and Answered-PhoneB transfers PSTN call back to PhoneA-Phone A answers but call Dro...

Using load SCCP70.8-3-2SR1S for the 7970, CUCM 4.2 I am getting an XML Error when searching names in corp directory... Anyone else getting anything similar, any ideas?

Hallo,I have got a confusing problem! Maybe someone could give me a hint or solution for that.On one site ?A? I have got a CM on the other site of a MPLS line (Site B) I have got a voice gateway (H323). (124-15.T1). All phones on site B are registere...

What is the feature differences between the following 2 parts?:NM-1CE1T1-PRI VWIC2-1MFT-T1/E1

can I install 2 pvdm2-64 and 4 E1 interfaces in a 2801?thanks

Hi, I want to restrict conferencing on the Voice gateway who is providing the DSP resources for specific calls. The scenario is like this: I am having a single line phone which can be part of only one partition and one CSS. I am having two gateways...

Hello!I have a CallManager and a GSM Box with one SIM inside.The GSM Box is attached to the VoiceGW by a FXO card.The SIM has 900 free minutes/month, after which GSM calls are "expensive".I' like to block routing of GSM calls to the GSM Box if the ti...