Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,Would like to ask whether with the memory size of 205xxxx, usage is 203xxxx and the availability is only 19xxx. In a way is it healthy for the publisher server?What are the main reasons of the high memory usage? If a CUOM is used, does it also pla...
hello,i have shrinked the cdr database, and this operation worked good. i let the ccm under seurveillance , after i noticed that the cdr can't be inserted in the cdr database ( the cdr generated but stocked in the BAD folder ).in the attachement the ...
I have a remote branch with MGCP gateway connecting to the PSTN via POTS line.When a user is on a call and another call comes in he hears the call waiting tone but the second call never appears on the phone. Thus he can never pickup the second call,...
According B-ACD configuration, when a caller presses 0 for the operator, the digit 0 maps to the highest hunt group (aa-hunt1 to aa-hunt10) that has been configured. The hunt group aa-hunt10 is always reserved for the operator, and the default operat...
Dear all,I have CCM (v5.1.2 installation without DNS) and cisco 2811 (with ISDN PRI E1 trunk to PSTN) as a H323 GW, but 2811 doesn't seem to register with CCM.In CCM I've configured router as H.323 type GW in the following way:IP address/Device Name ...
hii, i have a problem with the implmentation of the QoS in my router and the remote router, below the policy-map: policy-map xxx class voice priority 200 set dscp efthe problem is that when i apply the QoS there is disconnect in the vocie, but w...
No audio when a call comes over the H323 G/w using MPLS link from Avaya IPOffice 412 to call manager 5.1.Phone Rings and CLI displays but no audio stream.Please suggest.thanks and regardsArvind
I've done this once before but am missing something this time. I have my MOH source file set for multicast with address 239.1.1. port 16384 (using G711) and have the MRG set to allow multicast.Device Pool's MRGL was updated and phones reset.The remot...
We have a 4503 with Sup II+ running IOS 12.2(37)SG. Our Avaya PBX medpros and clans are connected to the WS-X4548-GB-RJ45 blade. Two ports of that same blade are the uplinks to two 6506 distribution switches.The uplink ports are L3, and the ports c...
Hi,I have a Call Manager 5.1 trying to establish a MGCP connection with a Cisco 2801. I think that I perform all the steps correctly, but the following message appears: Rejected. Unknown MGCP Gateway. NotEntryinDatabase. It seems that the Gateway con...
Since Caller ID can only be delivered using a MGCP gateway and not a H.323 gateway, can two seperate Call Managers register to the same MGCP gateway?
Hello,I had a feedback from a client that it is quite interesting. He is using a CCM Version 5.1 and was wondering if the Route Pattern could be disabled on the CCM configuration page. Apparently, this is not possible, is it in other version or is th...
Anyone seen 3.1(MF.G2) load on new 7940 phones, it?s not updating to 8.0(7), none of my 8.0(5) phone are updating either, default load is correct at 8.0(7)(I uploaded cmterm-7940-7960-sccp.8-0-7.cop.sgn with no issues). Also on load 3.1(MF.G2) the L...
Hi,Suppose this situation: I have 7920 phones I would like to know their status through 7940 BLF buttons.The 7920 phone DN (ex:444) is different from the "Telephone Number" I filled on the user configuration page associated to this 7920 (ex:#444).Sho...
Hi,Does anyone know how to make ViewMail 4.1 work with Outlook 2007 or if there is a new version of ViewMail that will work with Outlook 2007?Any info would be appreciated!Thanks,Scott Turner
