Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
CCM 4.1(3)sr3a with BAT 5.1(4a). Is this system support BAT for VG224?
Is there a way I can generate a report from CAR showing all AAR calls?
Hi,I can't seem to get the caller-id when i make a call from the E1 (PBX) to the voip sip network. With this IOS version "c2430-is-mz.124-13.bin", I can't find the commands " caller-id enable" and "station-id number".Here is the config attached.On th...
Cisco IP Communicator (CIPC), Cisco Unified Personal Communicator (CUPC)What's the difference between them? Just different name? Thanks
I read on this forum that a E&M interface can handle only one call at a time. So why do we call it a Trunk, and so what's the point of using E&M instead of FXS if both can handle only one call.cheers
I've been trying to research the "mgcp rtp unreachable timeout command". Although there is plenty of information about this command I have been unable to find out what an "action notify" suffix means. Does anyone know?ThanksJustin
Hello,Does anyone knows what is the best practice to Unregister a Unity Secondary Server ver 4.2 from CCM 4.2.3?Many thanks in advance,Maddox
I have been going back and forth with the service provider. We have a PRI handling off net calls which gets roughly 1 slip and 1 sec error every 30 seconds. This is causing echo and dropped calls. Attached is a copy of the PRI config any ideas would ...
Hello,Does anyone know what is (On the Cisco CCM) is a key sequence that the user can dial i.e. 8001 or 8002 to turn lamp on / lamp off in the config?orWhat is the key sequence to add / remove the message waiting lamp on the Cisco phones? User IP Ph...
Hello,Does anyone knows from where I can download OS Version 2000.4.3.a?I was looking into Cisco.com download voice software links and all I can find is either OS upgrade, either OS Service Releases, but not OS.Many thanks in advance,Maddox
Does anybody know that in flex mode(default codec complexity) in GW 28xx, is it g729a or g729 if we specify g729 under dial-peer?
Does anybody know that L3 switch can put the voice packets into the proper input queuing based on dscp? As I know that L2 switch does this based on cos value. I have 2821 GW connects to 6500 IOS image switch. It's not dot1q trunk. so there is no cos....
Does anyone know if 4.2 has the functionality to overide a divert on an ext??On our old pbx entering #5 before the ext number made the destination ext ring even if a divert was set up on it.Our users are kicking off big time about this losing this fe...
I've been working all day with TAC trying to get the file delete.csv from the .tar file that is generated from the DMA. I've ran into a problem that the upgrade fails, Cisco has came back and said that there is a bug CSCse53281 and I need to remove ...
i m vvv confuse abt this concept....first of all whats the difference between these three and secodnly in which environment we will deploy MGCP or H.323.......in depends on what that we will choose SIP in out network or the other two....thanks a mill...
