Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi Friends,I'm new to VoIP and I need to buy a voice module for a Cisco 3640 in order to configure a half PRI E1 (15 channels) it will be connected to an Adtran Express 6541 (I will need a balun), which is right module that I need?Erick.
Can I restoer the BAT.xlt "Template" if this file delet from CCM 5.x .if yes please to provide a link .
Is there a way to design and configure voice gateway acting like the concept of hot standby routing protocol (HSRP) ? If one of the voice gateway goes down, the "standby voice gateway" will replace it and use the same line/voiceport to PSTN.
As I know the IP Phone to IP Phone is RTP and the port number is randam and the range is very large(16384 -32767 /UDP)How to configue ASA/PIX to make the voice stream through firewall but not configre allow so large range port number?
Is there any 'import tool' in Unity Connection that will allow me to bulk update the E-MAIL Address field for SMTP for all the users? Anyone has done this??
I have a fleet of the 7960G IP phones and recently bought a couple 7970G phones for use with the managers and am now curious, since we don't have PoE here can I use the PWR-CUBE that I have been using with the 7960s? Or will I need some kind of new p...
I am on site and trying to get overhead paging to work. I currently have a BOGEN TAM B and a Bogen TPU 15 A and an FXS port on the gateway. Has anyone tried this set up before, or can anyone help me out on this?
I'm trying to upload csv file to Bat and keep getting this error? Unmapped Exception No space left on deviceAnyone know what this is?
From all system guide and administration guide of all available CCM versions, I read that a Cisco Unified CallManager group comprises a prioritized list of up to three Cisco Unified CallManagers.My question is if it is possible to have more than thre...
Hi.Is it possibly to "Hang up" after the Greeting in a mailbox, like in Cisco Unity?Maybe via CLI.I use CUE 2.3.4/Johnny
Just wondering if anyone knows when the MCS-7816 will be available and what platform (HP/IBM?) it is based on? Would rather wait for the 1U factor than a 7815 purchase.Thanks
mls qos trust dscpdoes the above command need to be on the switchport that the router is plugged into as well as the port the BCM is plugged into?
Hi, im setting up a trunk CME - AVAYAHow can a revice in CME a call with codec G711ulaw, because avaya its sendme the call with that codec, and CME use G729 per defaultThanks
Hi All,I want to integrate CallManager 5.0 with Unity express 2.3Could you please help with a step by step documentation?ThksEric
CME: 3.3Every time I reboot the IP Phone 7960, at the bottom of screen show "FILE NOT FOUND:distinctiv", but phones are working ok.Any reason why does that??Ken
