Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We have installed cisco TSP client for calling from Outlook. This works fine. After a restart some client loses the line and have to manual select it's phone to use calling from outlook. Users are local admin. Is there an solution?
I have two subnets, my voice and data. The two subnets are bridged and are using different DHCP servers. I use PXE services (3com boot services) which also uses TFTP on my data subnet. The voice subnet only has phone server TFTP.My question is, ho...
Hi,I seem to be having a problem with a 4 port FXO card accepting a second call on a line hunt or rotary system. They are normal analogue lines, but its one main number that is used for the additional lines.My understanding is that when an exchange i...
For the 7940/60 there is a clear description of what you need and have to configure. For the 7941/61 it isn't. Can somone help on the right documentation??Regards,
hi all, I want to load a new license file for unity express 3.2I do not have a ftp server to upload the file to the unity express module.is there any other way (tftp for example)?i will apreciate any help
I have a customer that is requesting for the "call park at" notification to display on the phone longer then the default setting. They would like it to be for the duration of the call. Does anyone know if this is possible? I know it can be done wi...
When everything is up and running, the toll free numbers, namely 1300XXXXXX & 1800XXXXXX are coming in via the Voice Gateway, get translated at CCM, and passed to the relevant Hunt Groups and IPCCX queues.However, during SRST mode, these toll-free in...
I'd like to do statistics or graphs (with RDD tools or other tool) about E1 load on a cisco 2811 :number of simultaneus calls by E1, ...Is there a way to get these counters in snmp ?Or another method ?Thank'sVincent
Is it necessary to configure dspfarm profiles for the dsp's, or can you just use the commands "dspfarm transcoder maximum sessions" and "dspfarm confbridge maximum sessions" to set how you would like the dsp's to be allocated?
The problem is when we make a call to the PSTN (only certain numbers), it connects fine, and then gets transfered, you can hear the MOH from the remote PBX, but as soon as the call resumes, the user on the IP phone does not hear anything, but the rem...
Any easy way to invoke CLID blocking on an adhoc basis ? i.e an internal extn calling either internal or external numbers.
Is there a way in a route filter to detect/force the user to dial a 1 after the 9 for all long distance numbers? Currently, our route patterns are 9.@, using route filters to block 900, 976, etc. One problem is the user can dial 9 + 10 Digits, and ...
I have a few 2851's with 4 port FXS cards. The FXS cards plug into fax machines. When a call placed to one of the fax machines is overwith, and the calling party disconnects, the FXS port on our router is stuck in "connected" status for 45 seconds....
We have an internittent problem were it will sometimes take 3-6 seconds for Call Park to display on the set after Park is depressed. Has anyone seen this issue??Thanks...
Hi All,Does anybody know if we have any tool for CallManager 5.0 (5.1) to check database re-alignment like DBLHelper??? How are we supposed to work with database on Linux CCM?Thanks!
