Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
When SRST is in fallback mode (implying the WAN is down), can I assume that users at the remote site will not be able to access the DC Directory on CallManager? Also will an ATA register with the local router in fallback mode?Will conferencing work o...
HelloWe are using CME with 7911 IP phones and a 2811 with 4 FXO ports for PSTN connectivity.We have only one dial peer 9.% to get outside connectivity.This works fine if I dial 91xxxxxxxxx it connects just fine unless I dial to fast.If I configure a ...
HiI am trying to route calls from my internalk VOIP phones to PSTN, my route-pattern is working fine, as whenever i try dial 9 and 7 digit number, it automatically strips 9 but call doesnt go through to Gateway. there is no led initiated on FXO port ...
Is it possible? My first thought is no.
When I am trying to add users in call manager I am getting the following error "The phone administrator is currently not allowed to add or delete users" I have verified the access rights for the user and they appear to be correct.
I have a small office, 40 phones. I plan on using a Cisco 2851 Integrated Services router, running both Call Manager Express and Unity Express. It will also provide PSTN gateway services with 8-16 port FXO cards. 1) is there an industry standard for ...
Can someone tell me if the vwic2-1mft-g703 can do everything the vwic-1mft-g703 can ?On a previous installation for a client with a fractional E1 we used a vwic-1mft-g703, I have just specced up some kit for a new client who will be using a 3825 and ...
succesfully Installed Cisco CallManager 4.1(3) but when I am trying to access CallManager administration page it says page can not be displayed. I verified that IIS and WWW services are running still page can not be displayed. Please advice.
Hello, I'm new with IP telephony. I would like to do one question. I have installed several IP phones, but I would like that these IP phones have the displays in Spanish and I believe that this feature is changed with user locale, but I don't know if...
I have two call managers and about 30 sites. I have one of the call managers configured as a conference bridge. I have a media resource group configured with the call manager bridge resource. I have a MRGL configured for each site that contains the M...
Hi,I have got a voice detection trouble with my 7912 cisco phone, is there a way to manage the voice detection or to disable it without cisco call manager (my cisco phones are all running with the sip protocol).Thnak you very much for your answer.Bes...
Is there a link details about the time-of-day routing? Even the CIPT training book seems not clear to me. Say I want to 1000 call 2000 allowed at 9:00-5:00, outside of this time forward to vm. The book says create two partitions and assign both under...
I have AS5350 connected to the city telephon network by ISDN PRI. When the call from IP-network to the mobile phone of city network is occure and mobile phone in service - every thing is work. But when the mobile phone out of service the calling side...
the solution licensing guide found here http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/Solution_Bundle_Licensing_Config_VoD.pdfshows that a 7912 needs 2 DLUs, however the solution expert tools shows that you n...
Hello, I am trying to use the default script. However, I have only one queue. I just need B-ACD to run the welcome greeting and then ask the user to dial the extension. I don't want the B-ACD to pass the user to different queues. Do I have to modify...
