Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi Guys, My Customer is having the follow problem about one-way audio: User A IP Phone 8851 dialing to User B that is using one 8831, User A don´t hear audio and User B hear (internal calls, in the same site) User B IP Phone 8831 dialing to Use...
CUCM CUC IMP 11.5 - I followed a queue setup and this works well. Users have 7841 phones with lines 1) Users Extension 2) Hunt Group Ext. 3) Que Status 4) HG Login button. Normally, if a user misses a call on the hunt group ext, they get logged out,...
DearsI have CME 2811which command can verify phone quantities for the installed licensein UC5XX the command "show platform software license"Thanks in advnaceRegards
Hi guys, I was reviewing sip srst configuration from a different sources and didn't see any ephone-dn configuration , how router will know which dn must be registered ? example of the config: voice service voipip address trusted listipv4 10.210.255....
Hi Team,We have multiple Cisco DX650 at our client location.I have Checked the Parameter in CUCM device page that says allow application from android market.Even allow application from unknown source is enabledTried resetting,rebooting etc no goPlay ...
Hello Guys I have a doudbt about MTP. How Can I enable MTP Software CUCM and How Can I enable Software MTP on Router? I have been reading that if I want to MTP Software on CUCM I only have to enable MTP on SIP trunk and enable an specify servi...
We have been using the Extend and Connect feature for quite some time and it has been working very well for our people who work from home on occasion. Just today, we are noticing that it intermittently does not work. When attempting to dial from Ja...
Does anyone know what is meant by a letter "D" in the "Called DN" column of RTMT Real Time Data? Please see the attached screenshot.
I need to set up a DN to auto answer outside calls and play a recording (announcement maybe?) and then hang up without the option of leaving a voicemail. We're using CUCM ver 10.5. Any help would be greatly appreciated. Thanks!
Hi Guys. I'm trying to downgrade a CP 8861 from SIP 11.7(1) to SIP 11.1(1)MPP firmware but without success. I'm working with a Tfpt server instead CUCM. I got different messages about CTLSEP<mac>.tlv, ITLSEP<mac>.tlv, ITLFile.tlv, SEP<mac>.cnf.xml, D...
when i make conference with internal parties it works but when i try to get someone from outside into conference call dropped is it MTP issue or what any ideas
I'm looking for a mib (more specifically the actual oid) that will give me an active ds0 count on an mgcp pri connected to callmanager (in both ISR's and CMM's). I've done extensive searching on both netpro and google and everytime this question is ...
Hi, I'm using the PA (Public Announcment/Paging) capabilities of my VoIP system but I've encountered some issues regarding it's functionality. Here is my topology: Both IP phones, speakers and PA server reside in the same VLAN and network sc...
we are replacing 2800 Voice gateway with New 4321 VGW.. where we are facing issue with new 4321 VGw MGCP connection with CUCM (10.5 version) attached is the old 2800 & new 4321 voice gateway configuration PRI shows UP & running on new 4321 seri...
Hi Guys! Is there any way for the SIP 7940G to send SIP Option message or keepalives? Setup is 7940g <-->NAT <--> PBX As checked,it only sends REGISTER message every 1 hour, and no SIP OPTION or keepalive which we suspect the reason why the conne...
