04-06-2010 03:26 AM - edited 03-15-2019 10:07 PM
Hello,
We have IPphone in a branch and we want change speed and duplex in remote.
Maybe you know how to change this option of speed and duplex with CCMadmin with BAT ?
Thanks in advance
regards
Tom
Solved! Go to Solution.
04-06-2010 03:32 AM
Hi
It's not possible to do this with BAT; it's a property you would need to configure on each handset.
There is a tool available that can allow you to do this remotely, but still manually:
https://supportforums.cisco.com/message/1164373#1164373
There are a number of similar posts on the forum already; in general I would not recommend that you do this as you can guarantee that administrative inconsistencies between the PCs, phones, and switch ports on the customer's site will create more problems that it solves.
https://supportforums.cisco.com/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=speedduplexphone
Regards
Aaron
Please rate helpful posts...
04-06-2010 03:32 AM
Hi
It's not possible to do this with BAT; it's a property you would need to configure on each handset.
There is a tool available that can allow you to do this remotely, but still manually:
https://supportforums.cisco.com/message/1164373#1164373
There are a number of similar posts on the forum already; in general I would not recommend that you do this as you can guarantee that administrative inconsistencies between the PCs, phones, and switch ports on the customer's site will create more problems that it solves.
https://supportforums.cisco.com/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=speedduplexphone
Regards
Aaron
Please rate helpful posts...
04-06-2010 03:47 AM
Thanks , now it's sure we can't do it .
One by one .. a really long work !
04-06-2010 04:01 AM
Hi
Yes. It will take some time to do, and leave you with a never ending admin task of continually checking the settings of each phone/PC NIC/switchport every time someone's PC slows down slightly...
Aaron
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide