Dear all,
My IOS is 12.4(13r)T5, RELEASE SOFTWARE (fc1)
I notice that IOS automatically change my calling and called number type when it detect my calling and called number match with North American Numbering Plan. I don't want it. Can anyone notice it before? Is this a feature of IOS?
Are there anyway to overcome this? I want type and plan to be Unknown without using voice translation rule. I mean to overcome the North American Numbering Plan detection feature of IOS.
.Jun 18 17:25:51.919 CDT: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type 0x2 is 0x2 0x1, Calling num 3123959300
.Jun 18 17:25:51.919 CDT: ISDN Se0/0/0:23 Q931: Sending SETUP callref = 0x008C callID = 0x800D switch = primary-4ess interface = User
.Jun 18 17:25:51.919 CDT: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x008C
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98397
Exclusive, Channel 23
Calling Party Number i = 0x2180, '5123959399'
Plan:ISDN, Type:National
Called Party Number i = 0x91, '8481689485'
Plan:ISDN, Type:International
Thank you,
