04-03-2012 02:07 AM - edited 03-16-2019 10:26 AM
Good day!
Our customer want to remove beeping tone when new participant add to conference or leave this conference.
How can I remove this beep and beep beep signals?)) Thanks
Solved! Go to Solution.
04-03-2012 02:41 AM
Hi Oleksil,
I believe this is what you are looking for;
Service Parameters Configuration > Clusterwide Parameters (Feature - General)
Party Entrance Tone - False
Cheers!
Rob
04-03-2012 02:16 AM
Hi
What application you are using.
Is it CUCM or CUCME?
Regards
Ronak patel
04-03-2012 02:22 AM
Sorry. it is my first post).
We use CUCM 8.0
04-03-2012 02:41 AM
Hi Oleksil,
I believe this is what you are looking for;
Service Parameters Configuration > Clusterwide Parameters (Feature - General)
Party Entrance Tone - False
Cheers!
Rob
04-03-2012 02:54 AM
Thank you very much!
This is the same service parameter)))
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide