09-20-2011 02:43 PM - edited 03-16-2019 07:05 AM
I am installing a UC560 and need to add a door phone to system to ring at reception. The door hardware needs extension as hotline, so going off hook will cause it automatically dialing extension 221, so reception can press a number to activate door open.
Any suggestions?
Thanks
09-20-2011 11:28 PM
Hi Shane
Add "intercom 221 barge-in" to your ephone-dn for the door phone.
Barry
09-21-2011 05:41 AM
Hi,
Here is how to setup PLAR on CME:
ephone-dn 1
number 5000 ———– this number may be avoided (No need to call a courtesy phone)
intercom 4000 barge-in
ephone 1
button 1:1
autoline 1
As soon as you lift the handset or go off hook,it will call 4000. (simulates PLAR)
Here is another that will do PLAR in CME
ephone-dn 1
number 100
trunk 200
ephone 1
button 1:1
autoline 1
As soon as you will go off-hook, 200 will be dialed.
Christian Nuche
PDI Team
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide