12-15-2015 11:20 AM - edited 03-17-2019 05:14 AM
I am setting up a gateway that will connect to 5 PRIs set up on the telco side as NFAS.
I was wondering if there was any way to bundle these in NFAS with MGCP or if I have to make this an H323 gateway.
Solved! Go to Solution.
12-15-2015 11:34 AM
No, NFAS is not supported with MGCP. SIP or H323 is what you should be using. Assuming somewhat recent CUCM and IOS SIP would be preferred.
12-15-2015 11:34 AM
No, NFAS is not supported with MGCP. SIP or H323 is what you should be using. Assuming somewhat recent CUCM and IOS SIP would be preferred.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide