05-17-2007 07:08 AM - edited 03-14-2019 09:33 PM
All - we have not before used an external NTP source in our network. Will a new installation of CCM 5 I am thinking about implementing. I have looked at external sources such as "0.us.pool.ntp.org" but it looks like CCM requires an IP address in the NTP setup and I beleive the address above references different servers each hour. Can someone give me a link or directions as to setting this up? Or should I look to setting it up on our AD network and pointing CCM to that? Thanks.
Solved! Go to Solution.
05-17-2007 07:14 AM
I use 4.2.2.1 and it works like a charm for NTP and DNS. Another classic is time.nist.gov (192.43.244.18).
Hope this helps, please rate post if it does!
05-17-2007 07:14 AM
I use 4.2.2.1 and it works like a charm for NTP and DNS. Another classic is time.nist.gov (192.43.244.18).
Hope this helps, please rate post if it does!
05-17-2007 09:05 AM
Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide