09-24-2007 04:46 AM - edited 03-14-2019 11:41 PM
Hi,
I have are strange problem w/ incomming call on mgt8010->ISDN PRI->c3825->ccm5.1. So, 1-15 channels work fine, but 17-31 two-way no voice. Connection are established, no error, on debug isdn all..... but .... no voice.
Thank's for any help.....
09-24-2007 04:52 AM
What does the Show ISDN Service command display?
09-24-2007 05:00 AM
On all Layers is fine - ACTIVE.... MULTI_FRAME_ESTABLISH.... all ok
09-24-2007 05:20 AM
Global ISDN Switchtype = primary-net5
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not apply
ISDN Serial0/0/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0xFFFF7FFF
Number of L2 Discards = 0, L2 Session ID = 7
Total Allocated ISDN CCBs = 0
06-02-2008 07:44 PM
Hi,
I have a same problem. Could you solve this problem? How? Thank you very much.
Regards,
--
Alberto
06-13-2011 10:40 PM
Hi,
If anyone happen to get a solution for this issue? I have also the same issue gong on in my network..
Mohsin..
06-14-2011 03:02 AM
Please open new thread for new problem, and include FULL details about it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide