Switch port setting for Call Manager

[tomtom001]

Hi,

Just wanted to run a quick check with you guys. I appreciate the help. I have data on vlan 10 and voice on vlan 20. For the switch port that CCM connects to, would I assign it as an access switchport, but in the voice vlan?

interface FastEthernet0/20

description ***Call Manager Server***

switchport access vlan 20

My other ports have an IP phone with a pc connecting to the back of the phone:

interface FastEthernet0/0

description ***Phone+PC***

switchport mode access

switchport access vlan 10

switchport voice vlan 20

spanning-tree portfast

Thank you in advance for the help.

Tom

[Rob Huffman · Accepted solution]

Hi Tom,

You are right on the money! We are using the same "best practice" config here.

Hope this helps!

Rob

[gracianogardunojr]

on your FA 0/20 I would add this qos command.

mls qos trust dscp