Metro

Hi everyone,Currently I´m looking for information about Capacity Planning in ME-3600 and ME-3800 devices. I need to know about hardware description in detail, thresholds used (cpu, memory, etc), interfaces, queuing, latency and all the related with c...

Hi All,do you have any idea why we receiving this below logs messages,We are getting the same on one of our 6509 PE , and as per the documentation I had increase the channel ip igmp limit to 1000, but it still coming. I couldn’t able to get any docum...

Hi All I have a requirement in my typical LAN scenario whereby my LAN server connects in a dual homed fashion to two different LAN switches from a third party vendor. We are using vrrp for the server LAN. The two 3rd party vendor switches are uplinke...

Cisco 7609 ISO 15.1(2)S2Extract from show run:ethernet cfm ieeeethernet evc 10041005interface gi1/9service instance 1005 ethernet 10041005encapsulation dot1q 779 second-dot1q 1005rewrite ingress tag pop 2 symmetricxconnect <peer-ip> <vc-id> encap mpl...

Dear All,we have two sites and we`r using on both locations and both fabrics MDS9124 FC Switches, CWDM-MUX8A  - 8-channel (1470, 1490, 1510, 1530, 1550, 1570, 1590, and 1610) multiplexer/demultiplexer with monitor ports and LC connectors) -The connec...

Hi I have LMS CiscoWorks 4.0 instaled in a server, but the software is not support this devices. What am I supposed to do? I search in LMS CiscoView Device Package Updates this devices but not exist. Could someone help me?

Hello.Just a simple question about the Cisco ME-3400 series.Are the SFP socket MultiSource Agreement (MSA) compliant?Can we use SFP transceivers made by other vendors in ME-3400 switch?Thanks

Hi, Can ME 3600X provides 50-ms rerouting time upon link failure with MPLS TE/FRR?There are many failure detection mechanisms cause the routers to switch LSPs onto their backup tunnels:1.Interface Down Notification (When a router’s link or neighbori...

Hi, Can anyone help me for suggesting any good document / book for configuring B-RAS and Radius attributes. I need to configure B-RAS for IPoE sessions. Thanks.

Hello world !i'm looking for the right device to :centralized optical SFP distribution centralized vlan centralized routing centralized symetrique (in/out) bandwith management / vlandoes any one know  the good product  ??regards,

Hi all,I am trying to capture packets on a ASR i have tried the monitor sess type command and specified the source vlan but there is no traffic capture.Does anyone know how to do this?Is it possible?cheersKev

Hello,We need to organize vpls with ME3800 switches. I know that we can use two ME3800 on both sides of MPLS cloud. Is it possible to use ME3800 and ME3600 on both sides of MPLS cloud?

We are facing some multicast issue in our metro network, some time some fof the channels are getting freezed, when I checked the source router, i am not getting any porbelm, the VLC works fine, we have aroung 30 Nos of HD channel in the network and a...

Hi,I'd like to use CFM to take a link down when the remote side is not responding any more as the link is disrupted.Platform is CRS-1 w. IOS-XR 4.1:Here my configuration: ethernet cfm domain md0 level 4 id string crs_196_P2  service ma0 down-meps   c...