Hello everyone, I'm looking for working example: Out-of-Band Clocking or clock recovery in adaptive mode. My problem is that I have configure both scenario on 7609S (ios 15.0(1)S2 )with: 7600-SIP-400SPA-24CHT1-CE-ATMon both ends. Configuration on...
HiI am using a Cisco ISR4331 as a PE MPLS router and wish to forward a vrf named TEST over multiple MPLS-TE tunnels.The 2 x MPLS-TE tunnels each go to different PE MPLS routers.Both MPLS TE tunnels are up and operational.Under ip vrf TEST I have used...
After reading the following excerpt, I have some questions that I hope someone could clear up for me."An MPLS connection (LSP) is unidirectional—allowing data to flow in only one direction between two endpoints. Establishing two-way communications be...
We have MPLS circuit that flap last week, as appear in the logs, BGP was down because we lost BFD. I have also and IP SLA that doesn't showed any issue and was UP all the time.Yesterday I ran a packet capture in the router interface that connect wit...
I have the need of shown in just one command all arp table of all vrf in ASR1000 family, but this device doesnt support show ip arp vrf * / all command.
Hi,I am using a Cisco ISR 4331 router to act as a PE (Provide edge) mpls router.I am also using 2 Huawei NE40 routers as the P routers and also iBGP route reflectors.Within the MPLS domain I am using ISIS as my IGP.From an ISIS and iBGP persepctive a...
Hi everyone.I´m running a lab, simulating ans ISP connected to other ISPs and some clients. eBGP with other ISPs and iBGP and OSPF internally, and everything is working great. Now I´m trying to configure a customer MPLS network with internet access (...
Hello,Greetings of the day!!!!Can anybody tell me what is the basic concept of GMPLS and what are the benefits and significance of GMPLS in the Today's Network?
HI,our company wants go get p2p link between 2 sites but with having public IP. what is the service provider service where they provide p2p link with private IP.I already contacted to ISP but I don't know I was not properly explaining our requirement...
I have a box with the following alarms:RP/0/RSP0/CPU0:Jan 28 08:48:31.911 MET: bgp[1058]: %ROUTING-BGP-3-ERR_ALM_ONE_LABEL : [7] : Unable to allocate label: 'MPLS_LSD' detected the 'resource not available' condition 'Code(0)': No space left on device...
Hello all, I'm trying to build a tool for internal use to verify 'health' of MPLS L3VPN services.My first implementation just used CLI access and 'screen scrapping' I'm working on a new implementation using netconf (actually xmlagent on N7K) Just w...
Hi Guys,I'm currently studying for my MPLS 642-611 exam and I was wandering if anyone could point me to a repository for BGP AFI/SAFI numbers.Specifically, what are the AFI numbers for VPNv4 and VPNv6 addresses?ThanksRegardsScott
hi, I can't understand if a CISCO 9006 device supports the multilink function on PPP customers, it is used for bonding with 2 or more circuits. with CISCO ASR 1002 it succeeds
Trying to learn Segment routing :) I am trying to setup a SRTE ODN scenario as per the following topology CurrentlyAGG routers are receiving remote AGG vpnv4 routes with BGP next hop as remote AGG's loopbackLocal AGG routers has no ...