05-05-2008 09:45 PM - edited 03-10-2019 03:49 PM
Hi,
I having a problem on how to create a Shell command authorization for my Cat OS switches. My ACS version is 3.3
Appreciate you help
Thanks,
Jong
Solved! Go to Solution.
05-06-2008 04:59 AM
Jong,
Here are the CAT OS commands,
Set Based -
Console> (enable) set tacacs server [IP] [primary]
set tacacs key [key]
set tacacs attempts [number] (optional)
set localuser user [user] password [password] privilege 15
set authentication login local enable
set authentication login tacacs enable [all | console | http | telnet] [primary]
set authorization exec enable tacacs+ [deny | none] [console | telnet | both]
set authorization commands enable [config | all] tacacs+ [deny | none] [console |
telnet | both]
Here is the link for setting up command authorization , this example is for IOS but it you understand the concept, you should be able to set it up on CAT OS.
Regards,
~JG
Do rate helpful posts
05-06-2008 04:59 AM
Jong,
Here are the CAT OS commands,
Set Based -
Console> (enable) set tacacs server [IP] [primary]
set tacacs key [key]
set tacacs attempts [number] (optional)
set localuser user [user] password [password] privilege 15
set authentication login local enable
set authentication login tacacs enable [all | console | http | telnet] [primary]
set authorization exec enable tacacs+ [deny | none] [console | telnet | both]
set authorization commands enable [config | all] tacacs+ [deny | none] [console |
telnet | both]
Here is the link for setting up command authorization , this example is for IOS but it you understand the concept, you should be able to set it up on CAT OS.
Regards,
~JG
Do rate helpful posts
05-06-2008 06:36 PM
HI JG,
Wow! It works also in my CAT OS switches.
Thanks a alot,
Jong
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide