I have this unmanageip.pl perl script for solaris but i require one for windows.Could somebody provide me one for windows or help convert this one to windows, i do not wish to approach TAC just for this small a job.
Hi everybody,we have a problem in our CiscoWorks 2.6. We have defined some groups. When a router has a problem, it appears red coloured in the Topology Services in Campus Manager but the cloud of the group doesn't appear as red, it continues green.I...
Hello,i need to set the Port Speed and Duplex via SNMP on a Cisco 3750 - the problem is that i cannot find out which OIDs i have to use here. I already made a snmpwalk and checked the file for any entries that would lead to "Duplex" and "Speed", but...
I found 12 devices being in conflicting state, before resolving them I thought I will confirm what the GUI states and found the following:- I did an export of these 12 devices from DCR to get the sysObjectID stored in DCR. - I did an snmpwalk to get ...
I have a network of approx 40 routers spread across the US. I would like to be able to create on standardized config excluding IP addresses that I could upload to these routers. Any ideas, hints, or solutions would be appreciated.
Hello! I have a large network for monitoring by CiscoWorks and great amount of alerts is killing me. How to reduce number of Unresponsive alerts? DFM finds, that InterfaceOperStatus is UP and InterfaceAdminStatus is UP, but IPStatus is TIMEDOUT. As I...
hi i use ciscoworks snms 1.5.1 with common service 2.2 and ciscoview 6.0. when i open my 6509 switch ciscoview show only unsupported card on the slot. all the cards are gbic modules. can i update the ciscoview for this. thanks
I am looking at our server farm VLAN, and think we are getting close to some limitions. I have heard of a 50% rule, which in our case, a 22-bit should have no more then 512. We are currently at 555 and they are getting ready to add about 60 more s...
When trying to set the SMTP server in System Preferences I get the following message:Invalid IP address or server name for mail server. This bug is a known bug in CS 3.0, problem is that is should be fixed in 3.1I can telnet the SMTP server (Exchange...
I'm having an issue with Netshow not showing the output results of the job. It show that the job was successful but when I go out to view the job output it is not in the list to view. It was workinig at one point on December 6th.
can someone help me and explain how to work with it ? What are the difference between Customizable group 1 until C and the groups for Access Interface Trunk Ports ? Can someone help again and explain me how I can configure a switch to get only DFM al...
Platform: Cisco 6500, and Cisco 35501)I want to read via SNMP, all routes that have been nulled.2)I want to be able to put in new null routes.3) I want to be able to remove null routes.ie: read and write: ip route 1.1.1.1 255.255.255.255 Null0 314324...
Hi,I want to know if it is possible to manually add RME Device Packages? Using the GUI (Common Services > Software Centre > Device Update > RME >Check For Updates > Cisco.com) it tells me that all packages are installed, but I know that the Cat3000 p...
Anyone knows when Cisco plans to incorporate ssh public/private key in Cisco IOS so that I canbackup configuration from cisco devices withouthaving to put password in my scripts. Just aboutevery vendors allow ssh/scp via public/private keyauthentica...
