My Nexus 7K Sup module status shows fail but the module is active. I am trying to redo the diagnosis but can seem to get the command to work on the NX-OS. I have shared the show commands below. Kindly advise if any of you come across such situation. ...
Forum Posts
I still don't quite understand the option Peer, serve and query-only. I have some understanding about Peer, so both devices will compare each other to see which one's better but what criteria are they comparing (Stratum numer) and how the better one ...
Hi, The customer has hardware that is not supported by LMS 4.0. This will be displayed as a question mark. They have requested to change the unknown device icon from question mark to a generic icon, just colored rectangle. I have replaced the ...
how can i have a router on a stick so that the router s ip (ssh/telnet) is 10.0.0.1 vlan7the switch ip is 10.0.0.2 vlan7AND and here where i got stuck i connect a computer to the switch ports on the router (not the switch) with ip 10.0.0.10 how do i ...
I have gateway to gateway VPN between an RV340 and RV320. Inside this tunnel is a unicast video stream. It's stable and works most of the time without issue. HOWEVER once an hour enough packets get dropped that the stream goes down. it's only about 2...
Resolved! import ssl certificate for webui
hi allcan i some how import an ssl certificate for the webui?i mean a verisign ssl certificate or similar one for my.domain.name cheers rick
Hello All i m using cisco 3650 and ldap via radius (freeradius) solution to authentificate on my switchwhen i use an ldap account and its password i can access on to my switch in user modethat s workswhen i want to use mode ena i can 't use its passw...
Hi,I'm needing help to First, I installed successfully an FileZilla FTP server into a windows workstation connected to my network provider equipment. All worked properly from external side to connect to my FTP server. Then, because I need to share m...
Can I use a power injector even if my application does not require PoE? My current setup is as follows: LAN switch (WS-C3650-24PS-S) located at Point A, power injector (AIR-PWRINJ1500-2=) at Point B, and access point (AIR-AP1572EAC-B-K9) at Point C. ...
So I have the following situation:2 buildings with 2 networks of 240AC access points in mesh configuration. Each building and mesh is connected to a different internet provider, the APs connected through a SG-110-24 switch. The 2 networks are overlap...
Hello Guys!I am in the process of deploying a pair of Catalyst 9407 switches, using IOS XE version 16.12.4.I am using the SVL feature among Catalyst 9407, because I am using the Multichassis Etherchannel function, to connect the access switches to th...
I am attempting to run the archive command and get the below error when I run it. (edited to get rid of IP) my command: archive download-sw /overwrite tftp://X.X.X.X/file/path/s5700-universalk9-tar.152-7.E.tar archive download-sw /overwrite tftp://X....
Resolved! Disable DHCP Logging
Hello all. A router at a remote site running as a DHCP server constantly includes so DHCPCD logs and it's flooding my buffer. is there any way to disable these?
Hi all, I'm working on an issue with the SDWAN platform and made a packet capture on a Cisco ISR router, but now I need to get it off the device. The issue is that there is no direct access to this router in the branch due to a NATting device in fron...
Here is an EEM script for testing string trim: event manager applet tevent noneaction 1 set i "flash:/abc/def/ghia"action 2 puts "'$i'"action 3 string trimleft "$i" "flash:/"action 4 puts "'$_string_result'"action 5 string trim "$i" "flash:/"action 6...
