Network Management

Can't get this to work.  We have followed the videos from Cisco to the letter.  CCP runs, but when we attempt to use Traffic Monitoring, it is as if nothing is getting logged.In the command prompt windows that are opened after starting the interface ...

I have searched the posts and tried various things but cannot come up with a solution.I cannot get RME to acknowledge new credentials set in tacacs+. Campus sees them when I attempt Management Station to Device but all modules in RME do not. Cannot r...

We occasionally have a tunnel interface that flaps up and down on occasion, and a simple shut/no shut fixes the issue.   I saw that EEM scripts can perform actions based upon syslogged events, so we decided to give it a go.   I set up the following s...

I'm running LMS 4.2.2, and when I try to initiate a device package update via the webinterface, it fails because I do not have a proxy server configured.  Is there a way to tell LMS that I don't want it to use a proxy?  I have my cisco.com creds in p...

HiI have a question on the SNMP OID. I would like to browse an SNMP OID "cbQosCMPrePolicyPkt" on my switch ios v12.2(33). The configs are there and I can see the packets number when I do "sh policy-map controlplane"Output from my linux machine is bel...

Hi,I have installed VMware vSphere Enterprise Plus 5.0.0 and created a VM using an OVA file with LMS 4.1 running in Linux. It was working good since 3 weeks ago and I was adding snmp server configuration in all my devices (routers/switches) and sudde...

Hello,I have installed Cisco Prime LMS 4.2.2 on my Windows Server 2008 R2 SP1 x64. All works fine but when I tried to run discovery processes I received error messages:"Error in communicating with DCR Server. DCR Server may be down. Please start the ...

When opening LMS dashboard some histographs are in an open state - see screenshotThis is happening intermittently on supported versions of firefox and IE.LMS version 4.2.2.Please advise.

Hi all,I have a question regarding netflow and NAT. I have read some documentation (on ASR1000) regarding monitoring NAT process on Cisco ASR1000 that can be done using netflow version 9 (the term was called netflow event logging a.k.a NEL). The prob...

Hi,here is my config archive im using the solarwinds sftp/scp free server software.archive log config  logging enable  logging size 1000  notify syslog contenttype plaintext  hidekeys path scp://user:password@172.25.254.4/$h write-memory time-period ...

Hi guys,I just put my hands on a 2511-RJ unit. Here is the setup:show runCurrent configuration : 1308 bytes!! Last configuration change at 13:20:28 EEST Mon Sep 24 2012 by florinb! NVRAM config last updated at 11:19:07 EEST Mon Sep 24 2012 by florinb...

                   Hello when I try to open to CSM version 3.2 Performance monitor page from the CSM home page with an administrator account (or any account) I get the following message:You are not authorized to access the page "Critical Problems".  ...