Network Management

Hi I wonder if anyone can help. Using the custom properties and query expression section in LMS Prime 4.1 I would like to create a report that checks the movement of end nodes.For example I need to know if PC A on switch A has moved to switch B in th...

Hi,can any one help me  to view the Log on the Cisco 2821 router for any  issue occur.Thanks,Saroj

Hello,I have LMS on a public IP, and need a way to limit access port by port. As I know how to get aroung in linux, I thought I'll use iptables. But I loose all my iptables rules after every reboot, and this is not a standard linux (RHEL) bahavior.If...

Hi AllWe have just installed NCS on a virtual system .It appears to be working but apparently it is mapped to a hardware address.Now if for any reason the server was v-motioned would that mean the NCS loses all its settings.I have looked through the ...

I have a standalone router that I am using to run IP SLA jitter tests and that the sends ip sla traps on various reaction alerts.  The reaction alerts are mainly to detect periods of continous packet loss which occur when traffic exceed bandwidth of ...

I need to write a small scrip that will shut a port down, wait 30 seconds and then bring the port back up again.The reason is that shutting the port down will cut me off, it will enable some routing to converge properly and then I need the port bring...

I installed the upgrade license file and the wcs upgrade file and i was able to access the main page of ncs.  Then I exported my data from wcs and imported it to ncs, now when I log in to the ncs site I have to reinstall my license files.  However th...

Is there a way to describe custom asset tag numbers, serials or unique identifiers on cisco equipment other than Location and/or banner modification?We're wanting to incorporate our own asset numbers into each piece of equipment, but I'm not certain ...

I am unable to kill EPMServer processes after shutting down LMS 4.2 on Solaris 10. There are still 60 or so EPMServer processes running. Killing them manually does not work as they appear to restart again after killing. Only way to knock them off is ...

Hello, I am trying to create a complaince template in LMS 3.2.1 to check ALL extended access lists for an explicit deny any any rule. I found articles on how to check all interfaces including VLAN's but cannot seem to make it work for access lists. B...