Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.1 : Processes down for unknown reason...

Hello All,

We've just installed LMS 3.1 on Windows 2003 Server and i've got some issues...

The 5 processes below are down (see screenshot attached LMS31_3.jpg):

DFMCTMStartup

CfmDbMonitor

DFMOGSServer

NOSServer

PTM Server

As a consequence, as you can see in screenshots attached (LMS31_1.jpg and LMS31_2.jpg), DCR server, NOS Server and JRM Servers are down.

However all the Ciscoworks Windows services are started.

Do you have any idea from where the problem is coming from ?

Thanks in advance for your help,

Best Regards,

Adrien BOMBLE

4 REPLIES
Cisco Employee

Re: LMS 3.1 : Processes down for unknown reason...

Please post the output of the pdshow command and the CmfDbMonitor.log.

New Member

Re: LMS 3.1 : Processes down for unknown reason...

Hi JClarke,

I work with Adrien on these issues.

Please find attachaed the logs files.

Regards

Olivier

Cisco Employee

Re: LMS 3.1 : Processes down for unknown reason...

This is bad. The CmfDbEngine process is not registered with Daemon Manager. Your installation is incomplete. I recommend you uninstall LMS from this server, then do the following:

* Set the TEMP and TMP environment variables to short values (e.g. C:\WINDOWS\TEMP).

* Disable anti-virus software and security software (e.g. Cisco Security Agent).

* Configure Windows Data Execution Protection (DEP) to only operate on critical windows system files.

* Login as a local Administrator on the server's console.

* Install LMS 3.1 from scratch with locally mounted original media.

After doing that, you should have a working installation. If there are still problems, post the installation log found in the root of the C drive.

New Member

Re: LMS 3.1 : Processes down for unknown reason...

Hello Jclarke,

Thanks a lot for your help. I am doing that asap and i let you know.

Best Regards,

Adrien

141
Views
5
Helpful
4
Replies